User Manual

11.5 Making Printer Settings
310
Margin Settings
To open the screen: Press the SET key → Select with the SUB MENU keys →Print Settings screen
See Screen Layout (
⇒ p. 39)
Operating Key Procedure
1
SHEET/PAGE
Select the [Printer] page.
2
CURSOR
Move the cursor to the [Margins] item.
F1 to F8
Set the margins
3
CURSOR
Move the cursor to the [Left], [Right], [Top], and
[Bottom] items. (When [Custom] is selected)
F1 to F8
Set the margins.
See "Entering Numbers" (⇒ p. 64)
Custom Specify the top, bottom, left and
right margins.
(Default setting: Top, bottom, lef
t
and right 10 mm)
Auto (1cm/div) When printing a waveform, auto
-
matically adjust so that 1 division
equals 1 cm.
When printing information othe
r
than a waveform, print with the
same type of margins.
• Depending on the printer type, there may be slight differences in the size of
the actually printed margins.
• Depending on the printed content, margins may be larger than the specified
values.
• When printing a report, if the A4-Size (Report) setting is enabled, it has prior-
ity. In that case, printing may not occur with the specified margins.
Printing Color Settings
To open the screen: Press the SET key → Select with the SUB MENU keys →Print Settings screen
See Screen Layout (
⇒ p. 39)
Operating Key Procedure
1
SHEET/PAGE
Select the [Printer] page.
2
CURSOR
Move the cursor to the [Printing Colors] item.
F1 to F8
Select either choice.
Color Output in color (default setting).
Grayscale Output in grayscale.
Straight lines may be indistinct for some waveform display colors. To make
straight lines easier to recognize, you should select colors close to primary col-
ors.
See "7.1.1 Setting Whether a Waveform is Displayed or Hidden, and its Color" (⇒ p.
165)