User Manual

11.6 Setting the Print Content
312
Print Area Settings
To open the screen: Press the SET key → Select with the SUB MENU keys →Print Settings screen
See Screen Layout (
⇒ p. 39)
Operating Key Procedure
1
SHEET/PAGE
Select the [Print Items] page.
2
CURSOR
Move the cursor to the [Area] item.
F1 to F8
Select the print area.
Whole Print all of the recorded data (de
-
fault setting).
A-B Print the data between the A and
B cursors.
(These settings are valid when the Memory Function and Auto Print are enabled, the action of the PRINT key is [Quic
k
Print], and the printing type is [Screen Link].)
Printing specified ranges (when [A-B] is selected)
• Real-time auto printing of specified ranges is not possible when the Recorder
Function is enabled. When the Memory Function is enabled, specified ranges
can be printed automatically by setting Auto Print to [On] and Roll Mode to
[Off].
• The waveform range specified with the A and B cursors (Vertical or Trace cur-
sors) is printed. Printing is possible even if one of the A and B cursors is out-
side the screen.
• If only one cursor is used, the range from the cursor to the end of the wave-
form is printed.
• Printed of specified ranges is also possible when the printer recording format
([Printout Type]) is [Numeric].
Setting the Horizontal Axis Display Value
To open the screen: Press the SET key → Select with the SUB MENU keys →Print Settings screen
See Screen Layout (
⇒ p. 39)
Operating Key Procedure
1
SHEET/PAGE
Select the [Print Items] page.
2
CURSOR
Move the cursor to the [Time Value Display] item.
F1 to F8
Select the type of display.
1
Time* Print the time from trigger event (unit is
fixed). (default setting)
2
Mod 60* Print the time from trigger event (unit is
modulo 60).
3
Scale Print the number of divisions from trig
-
ger event.
4
Date* Print the date and time when waveform
was acquired.
5
Samples Print the number of samples from trig
-
ger event.
Time Mod 60 Scale Date
-2.000000 s 1m40 s 5
’04-10-30 10:20:30
Samples
500
* Printing for external sampling is done
according to the [Samples] setting.