User Manual

11.6 Setting the Print Content
313
11
Chapter 11 Printing
11.6.2 Printing Waveforms
[
Waveform Print Items] field in the [Print Items] page of the Print Settings screen
(This example screen shows the default
values for all settings.)
Make the following settings as required.
Press the SUB MENU key and select the [Print] menu.
Press the SHEET/PAGE key and select the [Print Items] page.
Selects the type of grid to print on the recording paper (⇒ p. 313).
Allows you to print the channel number or comments on the wavefor
m
(Channel Marker) (⇒ p. 314).
Specifies where to print the channel market on the waveform.
Allows you to print a list of setting or gauge with the waveform (
⇒ p. 314
).
Allows you to print the upper and lower limits of each channel. (The value
s
are scaled when the scaling function is active.) (⇒ p. 315)
Allows you to print channel comments in the zero position for each chann
el
(analog channels only) (⇒ p. 315).
Allows you to print a waveform acquisition count and a date or counte
r
name. (This is convenient for distinguishing similar waveforms.) (⇒
p.
316)
Allows you to expand or compress the time axis of the printed waveform
.
(This possible regardless of magnification and compression on the wave
-
form screen.) (⇒ p. 317)
For the row printing, waveforms are printed separately from other information
(settings and comments, gauges, upper and lower thresholds, zero position
comments and etc.).
Row printing:
See "11.3 Making Auto Print Settings" (⇒ p. 301),
"11.4 Making Manual Print (PRINT Key Output) Settings" (
⇒ p. 303),
"Print Example 4: Row Printing (1/4 steps)" (
⇒ p. 326)
Setting the Grid Type
To open the screen: Press the SET key → Select with the SUB MENU keys →Print Settings screen
See Screen Layout (
⇒ p. 39)
Operating Key Procedure
1
SHEET/PAGE
Select the [Print Items] page.
2
CURSOR
Move the cursor to the [Grid Type] item.
F1 to F8
Select the grid type.
(For the time axis, only the time axis is printed.)
Off, Normal (default setting), Fine, Normal (Dark),
Fine (Dark), Time Axis, or T-Axis (Dark)
Grids displayed on the screen are not reflected in the printout.