User Manual

11.6 Setting the Print Content
314
Channel Marker (Channel Number or Comments) Settings
To open the screen: Press the SET key → Select with the SUB MENU keys →Print Settings screen
See Screen Layout (
⇒ p. 39)
Operating Key Procedure
1
SHEET/PAGE
Select the [Print Items] page.
2
Select the type of channel marker.
CURSOR
Move the cursor to the [Channel Markers] item.
F1 to F8
Select the type of channel marker.
3
Specify the channel marker position.
CURSOR
Move the cursor to the [Marker Position] item.
F1 to F8
Select either choice.
Off Do not print the channel number o
r
comments on the recording paper.
Ch No. Print the channel number on the re
-
cording paper (default setting).
Comments Print the comments entered in the
Channel Settings screen over the
waveform on the recording paper.
Comment Setting:(
⇒ p. 113)
Inside Print near the waveform at intervals o
f
about one channel per division(defaul
t
setting).
Outside Print after the waveform.
Inside
Outside
CH1
CH1
List and Gauge Settings
To open the screen: Press the SET key → Select with the SUB MENU keys →Print Settings screen
See Screen Layout (
⇒ p. 39)
Operating Key Procedure
1
SHEET/PAGE
Select the [Print Items] page.
2
CURSOR
Move the cursor to the [List & Gauge] item.
F1 to F8
Select the type of print items.
Off Do not print a list of settings o
r
gauge (default setting).
List Print a list of settings. The list is
printed after the waveform.
Gauge Print a gauge. The gauge is printed
before the waveform.
List & Gauge Print a list and gauge.
Gauge
List