User Manual

11.6 Setting the Print Content
318
11.6.3 Printing Numerical Value Displays
[
Numerical Value Print Items] field in the [Print Items] page of the Print Settings screen.
Numeric values can be thinned before printing. Select whether or not to
link the printing to the display of numeric values on the waveform screen
.
Thinning is convenient when there are a large number of data points with
little variation in value.
(This example screen shows the
default values for all settings.)
Make the following settings as required.
Press the SUB MENU key to display the [Print] menu.
Press the SHEET/PAGE key to display the [Print Items] page.
To print numeric value data, set the Printout Type to [Numeric] or set
the Printout Type to [Screen Link] and Display Type of the Sheet set-
ting screen to [Numeric].
See "Recording Type Settings" (
⇒ p. 311)
Numeric Value Data Thinning Settings
To open the screen: Press the SET key → Select with the SUB MENU keys →Print Settings screen
See Screen Layout (
⇒ p. 39)
Operating Key Procedure
1
SHEET/PAGE
Select the [Print Items] page.
2
CURSOR
Move the cursor to the [Thinning] item.
F1 to F8
Select whether to link numeric value data with the
waveform screen.
3
When [No Screen Link] is selected
Set the thinning number.
CURSOR
Move the cursor to the field where the [Thinning]
number is entered.
F1 to F8
Set to Off for no thinning. For thinning, enter a
thinning number (2 to 1000).
See "Entering Numbers" (
⇒ p. 64)
No Screen
Link
Thinned data is printed.
Screen Link Printed data is linked with the numeri
-
cal value display thinning setting on
the Waveform screen(
⇒ p. 214)
(default setting).
When printing numeric values at the
same time as waveform display, for ex-
ample with Real-Time Print
The minimum thinning number is 100.
If the thinning number is 99 or lower, or i
f
thinning is Off, printing uses a thinning
number of 100.