User Manual

11.6 Setting the Print Content
319
11
Chapter 11 Printing
When the printing interval is longer than the record data
Data from the first sample only is printed.
• When there is data for a recording length of one division (= 100 samples) and
numerical value thinning is set to [2]:
The data is printed after thinning to every other sample.
• When there is data for a recording length of one division (= 100 samples) and
numerical value thinning is set to [1000]:
Only the first sample is printed.
When the Memory Function is enabled and Timebase 2 sampling is used
The data of Timebase 1 and Timebase 2 is printed. The data of Timebase 1 only
is thinned before printing. The data of Timebase 2 is printed in the field which are
closes to the timebase of Timebase 1.
See "Print Example 2: Measurement with Timebase 1 and Timebase 2, with Timebase 1
thinned" (
⇒ p. 327)