User Manual

11.6 Setting the Print Content
321
11
Chapter 11 Printing
Select whether to print titles (⇒ p. 112) and channel comments (⇒ p. 113) that
you have set in the Channel Settings screen, and settings data for the instru-
ment.
11.6.5 Printing Comments and Setting Data
[
Comment Printing Settings] field in the [Print Items] page of the Print Settings screen.
Select whether to print titles and settings data (function, timebase
,
time axis magnification or compression ratio, trigger times).
Select whether to print analog channel comments and channel set
-
tings (measurement range, vertical-axis magnification and compres
-
sion ratios, zero position, low-pass filter, full-scale value of range
(upper and lower limits when scaling or Variable is enabled).
Select whether to print comments for each logic channel.
(This example screen shows the default
values for all settings.)
Make the following settings as required.
Press the SUB MENU key to display the [Print] menu.
Press the SHEET/PAGE key to display the [Print Items] page.
Printing Titles and Measurement Conditions
To open the screen: Press the SET key → Select with the SUB MENU keys →Print Settings screen
See Screen Layout (
⇒ p. 39)
Operating Key Procedure
1
SHEET/PAGE
Select the [Print Items] page.
2
CURSOR
Move the cursor to the [Title] item.
F1 to F8
Select the content to print.
Off Do not print.
Settings Print the settings data of the instru
-
ment (default setting).
Comments Print title.
Set & Com Print settings data and title.
Title
Settings data