User Manual

12.2 Making Key Operation and Operational Settings
337
12
Chapter 12 System Environment Settings
Normally measurement starts when you press the START key one time. To pre-
vent measurement from starting by misoperations, you can set the START key
activation conditions.
12.2 Making Key Operation and Operational
Settings
12.2.1 Specifying Activation Conditions for the START
Key
Start measurement Start measurement
Operating Key Procedure
1
CURSOR
Move the cursor to the [START Key Activation]
item.
2
F1 to F8
Select the START key activation conditions
* When [2s Push] is selected
When you press the START key, a message ap-
pears to inform you that measurement will start if
you keep the key pressed for 2 seconds.
If you keep the key pressed for 2 seconds, the
message disappears and measurement starts.
One Push Measurement starts when the key i
s
pressed once. (default setting)
Two Push Measurement starts when the key i
s
pressed twice.
2s Push*
(for 2 seconds)
Measurement starts when the key i
s
pressed for 2 seconds.
START Key Activation Condition Settings
To open the screen: Press the DISP key→ Press the F7 [System] key→ Select with the SUB MENU key
s
→Env Settings screen
See Screen Layout (
⇒ p. 43)