User Manual

2.4 Waveform Screen
23
2
Chapter 2 Operating Keys and Screen Contents
Status Bar
Shows the processing status and various information about the current status of the instrument.
6 Display Sheet
Indicates the type and numbe
r
of the displayed Sheet.
1 Internal Processing State
3 Trigger Info
5 Setting Info
Appears when setting Auto Save,
Auto Print and A/B Cursors.
2 Number of Storage Events
8 Internal and External Connection Status (⇒ p. 24)
Appears when peripheral devices are connected or installed.
4 Sub Message 7 Displayed Information
(When Memory Division enabled) Shows the block
number of the displayed waveform.
(With FFT function) Shows the calculation data
type.
* Disappears upon start.
1 Internal Processing State
Pre-Trig Wait
Before acquiring data
Appears only when pre-trigger re-
cording is enabled.
Trigger Wait Trigger wait state
Scanner Wait Scanner module preparation state
Storing Data acquisition in progress
Storing Done Finished acquiring data
Waveform Waveform generation in progress
Calculating (n/m)
Numerical value calculation in
progress
Calculating (Zn) Waveform calculation in progress
FFT (n/m) FFT calculation in progress
Stopped Operation stopped
Preparing Preparation in progress
Ready Idle state
Printing Printing in progress
Saving Saving in progress
Auto-Ranging
Automatic range selection in
progress
Complete Finished automatic range selection
(File Name)*
Name of loaded file
2 Storage Events (Trigger Mode)
(Count) Number of data acquisition events
3 Trigger Info
Trigger factors (triggered unit/
module and channel, timer or
external trigger), date and time
4 Sub Message
(Time to Finish)
Projected time to finish storing (appears when recording dura-
tion is ten seconds or more)
Count to be Averaged (n/m)
Simple Averaging
(Time axis)
Simple Averaging
(Frequency)
Exponential Averaging
(Time axis)
Exponential Averaging
(Frequency)
Peak hold (Frequency)
Indicates current settings.
5 Setting Info
Auto Save (Waveforms)
Auto Save (Calculations)
Auto Save (Waveforms &
Calculations)
Auto Save (Screen imag-
es)
Auto Save (Waveforms &
Screen images)
Auto Save (Calculations
& Screen images)
Auto Save (Waveforms &
Calculations & Screen
images)
Auto Print
Auto Print
(External Printer)
Vertical Cursors
Horizontal Cursors
Trace Cursors
Sheet Selection: SHEET/PAGE keys
6 Display Sheet
Waveform FFT
X-Y
Composite
Nyquist
Numerical
Values
FFT+Nyquist
Waveform &
X-Y Compos-
ite
Waveform +
FFT
Waveform +
Nyquist
Block Selection: SHEET/PAGE keys
See "12.2.5 Specifying SHEET/PAGE
Key Operations" (
⇒ p. 340)
7 Display Information
Block number when measuring
with Memory Division enabled
Displayed block number for Mem
-
ory Division
New
(FFT function)
Use newly acquired data for cal-
culations.
MEM
(FFT function)
Use pre-existing data for calcula
-
tions.