User Manual

12.2 Making Key Operation and Operational Settings
338
If a power outage or other power loss causes an interruption in recording (while
the LED on the left side of the START key is lit), you can automatically resume
recording when the power is restored. If you are using triggers, the triggers are
restored to the Trigger Wait State.
12.2.2 Using the Auto-Resume Function (Resume After
Power Restoration)
Auto-Resume Function Settings
To open the screen: Press the DISP key→ Press the F7 [System] key→ Select with the SUB MENU
keys →Env Settings screen
See Screen Layout (
⇒ p. 43)
Operating Key Procedure
1
CURSOR
Move the cursor to the [Auto-Resume] item.
2
F1 to F8
Turn the Auto-Resume Function on or off.
Off Do not use the Auto-Resume Function.
(default setting)
On Use the Auto-Resume Function.