User Manual

12.2 Making Key Operation and Operational Settings
341
12
Chapter 12 System Environment Settings
You can select whether measurement restarts immediately after changing mea-
surement-related settings.
When variable auto adjustment is enabled, the variable setting becomes linked
to changes in scaling and voltage range settings.
Variable function settings:
See "8.9.4 Setting Arbitrary Waveform Height and Position on the Vertical (Voltage) Axis
(Variable Function)" (
⇒ p. 208)
12.2.6 Selecting How Settings Affect Measurement
(Restart Permission)
Restart Permission Setting
To open the screen: Press the DISP key→ Press the F7 [System] key→ Select with the SUB MENU key
s
→Env Settings screen
See Screen Layout (
⇒ p. 43)
Operating Key Procedure
1
CURSOR
Move the cursor to the [Restart].
2
F1 to F8
Select either choice.
No Measurement does not restart. Settings
cannot be changed while measuring.
Also, the Settings screens are not acces-
sible.
Yes When a setting is changed while measur-
ing, the change takes effect and mea-
surement restarts immediately.
(default setting)
12.2.7 Performing Variable Function Auto Adjustment
Variable Auto Adjustment
To open the screen: Press the DISP key→ Press the F7 [System] key→ Select with the SUB MENU key
s
→Env Settings screen
See Screen Layout (
⇒ p. 43)
Operating Key Procedure
1
CURSOR
Move the cursor to the [Variable Auto Adjust-
ment] item.
2
F1 to F8
Turn variable auto adjustment on and off.
Off Do not perform auto adjustment of the
variable setting.
On Perform auto adjustment of the variable
setting. (default setting)