User Manual

12.2 Making Key Operation and Operational Settings
342
Beep sounds can be specified to alert you to operation status. They can be
selected from two types.
Sounds can also be emitted for key operations.
12.2.8 Specifying Beep and Operation Sounds
Beep Sound Settings
To open the screen: Press the DISP key→ Press the F7 [System] key→ Select with the SUB MENU key
s
→Env Settings screen
See Screen Layout (
⇒ p. 43)
Operating Key Procedure
1
CURSOR
Move the cursor to the [Beep Sound] item.
2
F1 to F8
Select the beep sound.
Off Do not emit beep sound.
Beep 1 Emit a beep sound on error messages
(error and warning displays) and when
results are judged to be invalid. (default
setting)
Beep 2 In addition to the Beep 1 events, emit a
beep sound on start, trigger, stop, and
the end of auto save.
Operating Key Procedure
1
CURSOR
Move the cursor to the [Keypress sound] item.
2
F1 to F8
Select whether or not to emit operation sounds.
1
Off Do not emit sound. (default setting)
2
Type 1 Emit sound.
3
Type 2 Emit operation sounds. However, the
sound is emitted only once, even if the
key is kept held down.
Key Operation Sound Settings
To open the screen: Press the DISP key→ Press the F7 [System] key→ Select with the SUB MENU key
s
→Env Settings screen
See Screen Layout (
⇒ p. 43)