User Manual

12.2 Making Key Operation and Operational Settings
343
12
Chapter 12 System Environment Settings
A screen saver can be set to appear after a specified number of minutes during
which no operation key is pressed. This prevents screen burn-in. If a monitor is
connected to the MONITOR jack of the instrument, the screen saver also
appears on the monitor.
To exit the screen saver
Press any key. The operating screen appears again.
12.2.9 Making Screen Saver Settings
Screen Saver Settings
To open the screen: Press the DISP key→ Press the F7 [System] key→ Select with the SUB MENU key
s
→Env Settings screen
See Screen Layout (
⇒ p. 43)
Operating Key Procedure
1
CURSOR
Move the cursor to the [Screen Saver] item.
2
F1 to F8
Set the wait time until the screen saver is activat-
ed, or disable the screen saver.
(Set time) Setting range: 1 to 30 minutes (unit 1
minute)
The screen saver is activated if the spec-
ified time is exceeded.
Off Disables the screen saver function. The
operating screen is always displayed
.
(default setting)