User Manual

2.4 Waveform Screen
24
8 Internal and External Connection Status
Appears at the lower right when a peripheral device is connected or installed.
"Chapter 13 Communications Settings"
(
⇒ p. 359)
LAN
Connection Status
(Blank)
Disconnected State
Charging finishes about two hours
after power on.
"3.2.4 If the Model 9719 Memory Back
-
up Unit is Installed" (⇒ p. 59)
Battery Charge
(Blank)
Disconnected
Rapid charging
Rapid charging finished
Internal Printer
(Blank)
Printer not installed
Printer Installed
Head-raised error *
1
Out-of-Paper error *
1
* Appears when an MO disk is in-
serted.
Internal Storage Media
Hard drive installed
MO drive installed*
Appears when a floppy disk is insert
-
ed in the Model 9716 FD Drive.
Model 9716 FD Drive
(Floppy drive)
(Blank)
No floppy disk
Floppy disk present
PC card
(Slot 1)
PC card
(Slot 2)
Internal Storage Media
(when internal drive Model
9718 HD Unit or
9717 MO Unit is installed)
9716 FD Drive
LAN
Power
Supply
(AC/DC)
Internal Printer
(when Model 8995 A4 Printer
Unit or 8995-01 A6 Printer
Unit is installed)
Battery Charge
(when Model 9719 Memory
Backup Unit is installed)
Appears when a PC Card is inserted
in PC Card Slot 1 or 2.
PC Card
(Blank)
No PC Card
PC Card present
GP-IB Card present
Power Supply
(Blank)
AC power supply
DC power supply
*1. Remedial Actions
Display Remedy
Printer lever is raised. Check the position the head-raising lever.
Out of paper. Load recording paper.
See "3.3 Loading Recording Paper (With a Printer Module Installed)" in the Quick Start Manual