User Manual

12.3 Making System Settings
354
To obtain a new IP address, or release an IP address
(Only when IP address is obtained automatically from a DHCP server (DHCP:
[On]))
Select the [Renew] or [Release] button.
LAN Check
To open the screen: Press the DISP key→ Press the F7 [System] key→ Select with the SUB MENU key
s
→Init Settings screen
See Screen Layout (
⇒ p. 48)
Operating Key Procedure
Checking the LAN Connection Status
1
CURSOR
Move the cursor to the [LAN Check] button.
F1
Select [Execute].
The [LAN Check] dialog box appears.
Checking the Connection Status of Specific Destinations
2
CURSOR
F1
Move the cursor to the [Ping…] button and exe-
cute.
The [PING] dialog box appears.
3
CURSOR
F1 to F8
Move the cursor to the [Address] item and specify
the connection destination IP address.
Set other items as required.
4
CURSOR
F1
Move the cursor to the [Start] button and execute.
The connection results are displayed.
The connection is normal if "LOST=0" appears.
To close the dialog
Select the [Close] button.
1
4
Current connection status
Current connection settings
2
3
[Refresh]
Select when yo
u
want to refresh th
e
display.
To cancel the test
Press the STOP key or the ESC key.
Connection results
Wait time when there is no response (1 t
o
60 seconds)
The message "No response" appears if thi
s
time is exceeded without a response.
Number of attempts (1 to 100
)
Transmission data
size (32 Bytes to
32 KB)
If "No response" appears
• Check to be sure that the LAN cable is connected correctly.
• Check the communications connections settings and try the LAN check again.
See"13.2 Controlling the Instrument over the LAN Interface" (⇒ p. 362)
• There may be no response if the connection destination is behind a firewall.