User Manual

12.3 Making System Settings
355
12
Chapter 12 System Environment Settings
Media Check
To open the screen: Press the DISP key→ Press the F7 [System] key→ Select with the SUB MENU key
s
→Init Settings screen
See Screen Layout (
⇒ p. 48)
Operating Key Procedure
1
CURSOR
Move the cursor to the [Media Check] button.
F1
Select [Execute].
The [Media Check] dialog box appears.
2
CURSOR
F1 to F8
Move the cursor to the media selection field and
select the media.
Only connected media are shown.
3
CURSOR
F1 to F8
Select the button for the check to perform.
The results for the selected check are displayed.
4
CURSOR
F1
Select the [Close] button.
FD Check whether a floppy disk is
normal.
PC CARD #1
PC CARD #2
Check whether a PC Card is normal.
MO Check whether an MO disk is norma
l.
HDD Check whether a hard disk is normal
.
USB Check whether a USB disk is normal
.
Device
Information
Display device information.
Media
Information
Display media information.
Read/Write
Check
Perform a read/write check.
(Several minutes may be required.)
(The media must have adequate free
space.)
Execute All Execute all of the above.
Results
1
Before executing this test
Check to be sure that media is inserted or connected.
3
4
2
In the [Read/Write Check], data is actually written to and read from the media,
which may damage the media or result in the loss of recorded data. Do not per-
form this check using media on which important data is recorded.