User Manual

13.1 Connection Configurations
360
Connect the LAN cable to the 100BASE-TX connector on the right panel of the
instrument.
You can monitor and control the instrument from a PC by connecting the instru-
ment to a hub with LAN cable (100BASE-TX cable).
13.1 Connection Configurations
Connecting the Instrument to a Network
(Connecting the Instrument to a Hub)
RX/TX LED
LINK LED
Flashes while data is being sent or received
.
Lights while the instrument is capable of
communications with a destination device.
LAN
100BASE-TX
Straight-through cable
Hub
Memory HiCorder
Hub
100BASE-TX
Straight-through cable
PC
LAN
100BASE-TX
Straight-through cable
Hub
Memory HiCorder
Hub
100BASE-TX
Straight-through cable
PC
C
onnecting several instruments to one PC
Connect the cable to the 100BASE-TX connectors
on the instrument and the hub.
C
onnection cable: Use one of the following.
•
100BASE-TX straight-through cable (maximum length 100 m, commercial
ly
available)
(10BASE-T cable may also be used for 10BASE communications)
•
9642 LAN Cable (option)
100BASE-TX connector
Connect to hub