User Manual

13.2 Controlling the Instrument over the LAN Interface
362
1 Make settings on the instrument.
Make LAN settings in the Communications (Comm) Settings screen.
Move the cursor to the [Apply] button and select F1 [Apply].
(The settings are not reflected to the currently active LAN if the button's function
is not executed.)
2 Connect the instrument to the network.
Connect the LAN cable. (⇒ p. 360)
3 Connect the PC.
See "13.3 Using FTP to Access Instrument Files (FTP Server)" (⇒ p. 369),
"13.4 Performing Remote Operations on the Instrument from an Internet Browser
(Web Server)" (⇒ p. 374)
13.2 Controlling the Instrument over the LAN
Interface
13.2.1 Settings and Connection Procedure
Always make LAN settings before connecting to the network. If you change set-
tings while connected to the network, IP addresses may overlap or invalid
address data may flow over the network.