User Manual

13.2 Controlling the Instrument over the LAN Interface
367
13
Chapter 13 Communications Settings
5
Operating Key Procedure
5
To use WINS
Enable WINS and set the IP address.
CURSOR
F2
Move the cursor to the [WINS1] item.
Select
[On].
If you wish to use 2 WNS servers, also set
[WINS2].
(When [On] is selected for WINS1 and WINS2)
CURSOR
F1 to F8
Move the cursor to the [IP Address] item.
Enter the IP address.
6
To apply communications settings
CURSOR
F1
Move the cursor to the [Apply] button.
Select
[Apply].
A dialog appears.
F2
Select [Execute].
Select this button after you have fin
-
ished making settings.
6
After applying the settings, connec
t
the LAN cable.
About Host Names
Valid characters:
Alphabetic characters (uppercase and lowercase), numbers, symbols (only
hyphen (-) and underscore (_))
Characters other than those listed above cannot be used.
Host names cannot begin with a number or symbol, and cannot end with a sym-
bol.
Contact your network administrator for more information about IP addresses and
the other settings required by your network.