User Manual

13.2 Controlling the Instrument over the LAN Interface
368
1
2
4
3
5
Interface Communication Settings: 1:1 Connections
To open the screen: Press the DISP key→ Press the F7 [System] key→ Select with the SUB MENU
keys → Comm Settings screen→Select the [Communication] page with the SHEET/PAGE key
Operating Key Procedure
1
Set the host name, authorization user name, and pass-
word.
CURSOR
F1 to F8
Move the cursor to the various [Basic Settings]
fields.
Enter the host name, authorization user name,
and authorization password.
See "Authorization User Name and Password"
(
⇒ p. 365)
2
Disable DHCP, and set the IP address and subnet mask.
CURSOR
F1
Move the cursor to the [DHCP] item.
Select [Off]. (default setting)
CURSOR
F1 to F8
Move the cursor to the [IP Address] and [Subnet
Mask] fields.
Enter the IP address and subnet mask of the in-
strument.
If you want to set the subnet mask automatically:
Press the [Set] button.
3
Disable the gateway.
CURSOR
F1
Move the cursor to the [Use Gateway] item.
Select [Off]. (default setting)
4
Disable DNS.
CURSOR
F1
Move the cursor to the [DNS1] or [DNS2] item.
Select
[Off]. (default setting)
5
Disable WINS.
CURSOR
F1
Move the cursor to the [WINS] item.
Select
[Off]. (default setting)
6
Apply the settings.
CURSOR
F1
Move the cursor to the [Apply] button.
Select
[Apply].
A dialog appears.
F2
Select [Execute].
Explanations of terms
"Setting Items" (
⇒ p. 364)
Using gateways
When connecting the instrument and a PC
with a 1:1 connection, set [Use Gateway
]
to[Off] if both are connected to the same
hub.
Select this button after you have fin
-
ished making settings.
6