User Manual

13.3 Using FTP to Access Instrument Files (FTP Server)
370
1
2
3
4
FTP Settings
To open the screen: Press the DISP key→ Press the F7 [System] key→ Select with the SUB MENU
keys → Comm Settings screen→ Select the [File] page with the SHEET/PAGE keys
Operating Key Procedure
1
Set the FTP server to On.
CURSOR
F1
Move the cursor to the [FTP Server] item.
Select
[On].
2
Set the access restrictions.
CURSOR
Move the cursor to the [Access Restrictions]
item.
F1 to F8
Select either choice.
3
Set the file time difference.
CURSOR
Move the cursor to the [Time Difference] item.
F1 to F8
Normally leave this set to [0 h].
4
Specify the character encoding.
(The encoding used to exchange file name information with the PC)
CURSOR
Move the cursor to the [Character Code] item.
F1 to F8
Set this according to the requirements of the FTP
software on your PC.
5
Apply the settings.
CURSOR
F1
Move the cursor to the [Apply] button.
Select
[Apply].
A dialog appears.
F2
Select [Execute].
Read/
Write
Writing to the media of the instrument (up-
loading), and file deletion and renaming
are permitted.
Read
only
File reading only is permitted. This pre-
vents files from being deleted or changed
from outside the instrument.
Local Use ASCII if the instrument display lan-
guage is set to English.
UTF-8 Use UTF8.
Check the documentation of your FTP
software for the character encoding to
use.
File names containing characters not be
-
longing to the display languages of the in
-
strument may not be handled correctly.
About the file time difference setting
When some versions of IE * are used, the
file time on the PC side may not match the
file time on the recorder side. In this case
,
set the file time difference.
(Example) -9h
* Internet Explorer
5
Select this button after you have fin
-
ished making settings.