User Manual

2.5 Settings Screen
27
2
Chapter 2 Operating Keys and Screen Contents
2.5.1 Status Settings Screen
Basic Settings: [Basic] page
Settings for Used Channels: [Use Ch] page
To open the Status Settings screen
Press the SET key.
Press the
SUB MENU keys
1
2
(The Settings screen appears.)
3
Press the SHEET/PAGE keys to select a page.
(When using the Memory Function)
to select the menu item.
Function Application
Settings
Set as occasion demands.
• Roll Mode (
⇒ p. 99)
•Overlay (
⇒ p. 101)
[Basic] Page (Memory Function)
T
imebase or Sampling
R
ate Setting (⇒ p. 89)
S
et the timebase of the hori-
z
ontal axis (time per division).
T
he sampling rate changes ac-
c
ordingly.
Set the timebase (horizontal axis) and recording length (recording duration).
External Sampling
Setting (
⇒ p. 394)
Select this to control samplin
g
by means of an external sign
al
input.
T
imebase 2 Settings
(
⇒ p. 92)
M
ake these settings to mea-
s
ure with two sampling rates,
o
r when using the Model 8958
1
6-Ch Scanner Unit together
w
ith another input module.
(
Memory Function only)
Recording Length
Settings (
⇒ p. 95)
Set the length (recording dura
-
tion) to record each time dat
a
is acquired.
[Use Ch] Page (Memory Function)
Setting Channel Nos to
use
(⇒ p. 85)
Select which channel numbers
to use.
Measurement Channel
Settings
Select the analog and logic
channels to use for measuring.
Select the channel or channel numbers to use.
Set when using Timeaxis 2
(
⇒ p. 93).
Select analog channels to us
e
for measuring (⇒ p. 85).
Select logic channels to us
e
for measuring (⇒ p. 85).
The maximum recording
length is displayed.
Settings can be reset.