User Manual

13.6 Controlling the Instrument with Command Communications
383
13
Chapter 13 Communications Settings
Operating Key Procedure
When controlling via GP-IB (Command Processing: [GPIB])
6
Select the mode
CURSOR
Move the cursor to the [Mode] item.
F1 to F8
Select either choice.
7
Assign an address
CURSOR
Move the cursor to the [Address] item.
F1 to F8 Select from 0 to 30.
Addressable Enable PC controllability
Disabled Disable PC controllability
About the Address
GP-IB requires that each device connect
-
ed to the GP-IB have a unique address.
6
7