User Manual

2.5 Settings Screen
28
T
imebase and Sampling
R
ate Settings
Set the timebase (horizontal
axis) and sampling rate
(
⇒ p. 89).
[Basic] Page (Recorder Function)
Set the timebase (horizontal axis) and recording length (recording duration).
Recording Length
Settings
Set the recording length
(
⇒ p. 95).
Settings for Saving
Waveforms
Set the save destination and
save name.
[Basic] Page (Real-Time Saving Function)
Set real-time recording conditions such as the timebase (horizontal axis), recording length (recording
duration) and save destination.
See "Chapter 9 Measuring with Real-Time Saving" (⇒ p. 225)
Recording Condition Se
t-
tings
Select the method of data ac
-
quisition: one-shot (single
),
continuous or timer.
Whole Waveform Time-
base
Set the timebase (time per div
i-
sion) for the whole measure
d
waveform (for envelope wav
e-
forms).
Save Destination Info
Usable settings are limited b
y
the available space on th
e
save destination.
R
ecording Length
S
ettings
Set the length (recording dura-
tion) to record each time data
is acquired or set the recording
time.
T
imebase or Sampling
R
ate Setting
Set the timebase of the hori-
zontal axis (time per division).
The sampling rate changes ac-
cordingly.
[Use Ch] Page (Real-Time Saving Function)
Measurement Channel
Settings
Select the analog and logic
channels to use for measuring.
The 8958 16-Ch Scanner Unit
cannot be selected.
Select the channel or channel numbers to use.
See "Chapter 9 Measuring with Real-Time Saving" (⇒ p. 225)
Select analog channels to us
e
for measuring.
Select logic channels to us
e
for measuring.
Settings can be reset.