User Manual

14.2 External I/O
400
1 Connect the GO/EXT OUT1 terminal, NG/EXT OUT2 terminal, and GND termi-
nal to the controlled device.
2 In the Ext Term (external terminal) Settings screen, make settings for the [GO/
EXT OUT1
] and [NG/EXT OUT2] external output terminals.
See For more information about other menu items
"14.2.6 External Output (GO/EXT OUT1)/ (NG/EXT OUT2)" (
⇒ p. 401)
3 Evaluate the measurement data.
See For more information about calculation settings: Analysis Supplement
The signal for the specified evaluation result is output.
Signal Output Procedure
GND is common. It can be connected to any ground.
Connection procedure:
"14.1 Connecting External Control Terminals" (⇒ p. 388)
Select the conditions under which the instru
-
ment outputs a signal.
(*: Waveform evaluation will be supported in a future version.)
Num calc Output the GO/NG results of numerical evaluation
(default setting).
Waveform * Output the GO/NG results of waveform evaluation.
Num | Wave Output results when either numerical evaluation OR
waveform evaluation * is GO or NG.
Num & Wave Output results when both numerical evaluation AND
waveform evaluation* are GO or NG.
(To open the screen: Press the DISP key→ Press the F7 [System] key→
Select with the SUB MENU keys →Ext Term Settings Screen)