User Manual

2.5 Settings Screen
30
2.5.2 Channel Settings Screen
Analog Channel Settings: [One Ch] page
Logic Channel Settings: [Logic] page (⇒ p. 32)
To open the Channel Settings screen
1
2
3
Press the SET key.
Press the
SUB MENU keys
(The Settings screen appears.)
Press the
SHEET/PAGE keys to select a page.
to select the menu item.
To make various settings with the All Channels list:
Comment settings: [Comment] page (⇒ p. 31)
Input Channel settings: [All Ch] page (
⇒ p. 31)
Scaling settings: [Scaling] page (⇒ p. 31)
Variable Function settings: [Variable] page (⇒ p. 32)
Logic Input Settings (⇒ p. 176)
Make these settings when using a logic probe.
See "Chapter 3 Input Channel Settings" in the Input Module Guide.
L
evel Monitor
I
ndicates the value and range
o
f input relative to the area
d
isplayed on the waveform
s
creen for verification.
(
⇒ p. 116)
A
ll Channel Settings List
(
⇒ p. 123)
Input Module Settings
(
⇒ p. 110)
Set the input channels for th
e
installed input modules.
See "Chapter 3 Input Chann
el
Settings" in the Input Modu
le
Guide.
These settings are also ava
il-
able on the [All Ch] page
(
⇒ p. 31).
Setting Unit (Module)
and Channel Nos.
Comment Setting (⇒ p. 112)
Make this setting to enter channel-specific comment
s.
This setting is also available on the [Comment] pag
e
(⇒ p. 31).
Comments can be displayed on the Waveform
screen. See "12.1.2 Displaying or Hiding Comments
"
(⇒ p. 335).
I
nput Waveform Settings (⇒ p. 164)
Set the waveform display color, zero position, vertical axis magnification and
display area. These settings are also available on the [All Ch] page (
⇒ p. 31).
Variable settings can be made on the [Variable] page (
⇒ p. 32).
Logic waveform settings can be made on the [Logic] page (
⇒ p. 177).
[One Ch] Page
Set analog channels.
Scaling Settings (⇒ p. 117)
Make these settings to convert measurement unit
s
for display as physical values when using a clam
p
or external sensor. These settings are also avai
l-
able on the [Scaling] page (⇒ p. 31).