User Manual

15.1 General Specifications
410
(4) Memory Storage (optional, must be specified when ordering)
Capacity Model 8860: One of the following is required
Model 8861: Two of the same type are required
• Model 9715 Memory Board (32 MWord memory)
• Model 9715-01 Memory Board (128 MWord memory)
• Model 9715-02 Memory Board (512 MWord memory)
• Model 9715-03 Memory Board (1 GWord memory)
Expansion method Exchange installed memory boards
(5) Memory Storage Backup Function
(Model 9719 Memory Backup Unit: option must be specified when ordering)
Waveform backup time Model 8860: Approx. 10 hours
Model 8861: Approx. 5 hours
(after full charge, @25°C, 77°F)
Waveform backup power NiMH battery
Charger built-in (charges when power on, approx. 2 hours charge time)
(6) External Storage
PC Card
Slots 2 Slots, compliant with PC Card Standard specification
PC Card Types I and II accepted
Card types Flash ATA cards, Hard disk drive (HDD) cards
Data formats FAT and FAT32 supported
Storage contents • Setting configurations
• Measurement data (binary ASCII, BMP) (data between A-B cursors can be saved)
• Screen images (BMP)
• Calculation results
• Thinned storage (simple ASCII)
Floppy disk drive (optional Model 9716 FD Drive)
Storage system 3.5-in. floppy disk drive (YD-8U10 Y-E Data)
USB interface
Storage capacity 1.44 MB (2HD), 720 KB (2DD)
Format FAT
Storage contents • Setting configurations
• Measurement data (binary ASCII, BMP) (data between A-B cursors can be saved)
• Screen images (BMP)
• Calculation results
• Thinned storage (simple ASCII)
Magneto-Optical Disk Drive (Model 9717 MO Unit: option must be specified when ordering; select
either this or the Model 9718 HD Unit)
Storage system 3.5-inch magneto-optical disk drive
Storage capacity 2.3 GB (supports 128, 230, 540 or 640 MB, or 1.3 GB)
Format FAT or FAT32 (compatible with super-floppy format)