User Manual
Appendix 1 Error Messages
A2
6
Printer internal error.
An unexpected error occurred. Perform a
system reset. If this error continues to ap-
pear, damage may have occurred requir-
ing repairs.
"12.3.3 Initializing Sys-
tem Settings (System
Reset)" (
⇒ p. 349)
11
File size exceeds 2 GB.
Files large than 2 GB cannot be saved.
Use partial or divided save to create files
smaller than 2 GB.
"10.3.2 Save Methods"
(
⇒ p. 258)
12
Disable write-protection.
Write-protection is enabled on the storage
media. Disable it.
"10.1 Storage Media" (⇒
p. 244)
14
Cannot load this file. The selected file cannot be loaded.
16
The file name already exists: cannot
save.
Change the file name.
"10.7.4 Renaming Files
& Folders" (
⇒ p. 291)
17
The directory name already exists. Change the directory name.
18
Could not rename file.
A file with the same name may already ex-
ist, or the file name is invalid. Give the file
a different name.
Verify whether the storage media is write-
protected.
The file may be already in use. Try execut-
ing after processing finishes. Verify that
you have access permission to the stor-
age media. (If it is in a shared folder on a
network)
"10.7.4 Renaming Files &
Folders" (
⇒ p. 291)
19
Could not copy or move file.
"10.7.1 Copying Files &
Folders" (
⇒ p. 289)
"10.7.2 Moving Files &
Folders" (
⇒ p. 290)
20
Path name exceeds 127 characters.
Change the path to 127 or fewer charac-
ters.
22
No waveform data to save. Acquire waveform data.
24
Cannot eject this media.
Only discs in internal MO drives can be
ejected.
"Ejecting an MO Disk
from the File Screen"(
⇒
p. 246)
25
Could not eject.
The storage media cannot be ejected be-
cause it is in use.
26
Cannot access shared folder.
The shared folder does not exists or you
do not have access permission.
"10.1.6 Using a Network
Shared Folder" (
⇒ p.
249)
27
Cannot find shared file.
No shared folder can be found for connec-
tion.
28
File is in use.
The file in the shared folder cannot be de-
leted because it is in use.
29
An invalid character is present.
A character is present that is invalid for file
names.
"When entering a file
name (for files to be
loaded on a PC)" (
⇒ p.
65)
30
Auto-ranging failed. Check the input signal.
"3.3.5 Automatic Range
Setting (Auto-Ranging
Function)" (
⇒
p. 73)
31
A/B cursor positions invalid.
The A/B cursors overlap. Check the cursor
positions.
"8.7 Specifying a Wave-
form Range" (
⇒ p. 193)
32
Zero-adjustment needed. Perform zero-adjustment.
Input Module Guide:
"3.10.17 Executing Zero
Adjustment"
Displayed Warnings
Msg
No.
Message Remedial Action Reference