User Manual

2.5 Settings Screen
33
2
Chapter 2 Operating Keys and Screen Contents
2.5.3 Trigger Settings Screen
To open the Trigger Settings screen
Press the SET key.
Press the SUB MENU keys
1
2
(The Settings screen appears.)
3
Press the SHEET/PAGE keys to select a page.
to select the menu item.
Analog waveform trigger settings: [Analog] page*
Logic waveform trigger settings: [Logic] page
(*[Analog 1 - 4] with Model 8860, or [Analog 1 - 4] and
[Analog 5 - 8] with Model 8861)
(Memory Function)
Set trigger criteria for the Memory Function.
Timer Trigger Settings
(
⇒ p. 156)
Set recording start and en
d
times, and set timing whe
n
desired to apply a trigge
r
within a specified period.
External Trigger
Settings (
⇒ p. 160)
Set this to accept triggerin
g
from a signal input on the Ex
-
ternal Trigger terminal.
T
rigger Mode Setting (⇒ p. 132)
S
ets trigger activation criteria.
P
re-Trigger Settings
(
⇒ p. 134)
M
ake these settings to record
p
rior to triggering. When Trig-
g
er Priority is On, triggering is
a
llowed during the Pre-Trig
W
ait.
A
nalog Trigger Settings
(
⇒ p. 140)
Logic Trigger Settings
(⇒ p. 153)
C
ombining Method
(
AND/OR) for Multiple
T
rigger Sources
(
⇒ p. 133)
(Recorder Function)
T
rigger Timing Setting
(
⇒ p. 138)
Set trigger criteria for the Recorder Function. Except for the following, settings are the same as for the
Memory Function.
Set analog waveform triggers (⇒ p. 140).
[Logic] Page
Set logic waveform triggers (⇒ p. 153).
[Analog] Page