User Manual

Appendix 5 Options
A52
Refer to the Input Module Guide for details of cables and clamps for connect-
ing to the input modules and the instrument.
Items indicated “specify when ordering” are not user-installable. For new pur-
chases, contact your supplier (agent) or nearest Hioki office.
Appendix 5 Options
Input Modules (Measurement Amplifiers)
These are installed by insertion into the compartments on the right side of the instrument. Modules can be swapped out as
needed.
Channels
Max Sampling
Rate
A/D
Resolution
Maximum
input voltage
Voltage Measurements
Model 8956 Analog Unit
2 20 MS/s 12-bit 400 V DC
Model 8957 High Resolution Unit 2 2 MS/s 16-bit 400 V DC
Model 8936 Analog Unit 2 1 MS/s 12-bit 400 V DC
Model 8938 FFT Analog Unit 2 1 MS/s 12-bit 400 V DC
Model 8946 4-Ch Analog Unit 4 1 MS/s 12-bit 30Vrms/60 V DC
RMS Voltage Measurements Model 8959 DC/RMS Unit 2 1 MS/s 12-bit 400 V DC
Voltage and Temperature
(Thermometer) Measure-
ments
Model 8937 Voltage/Temp Unit 2 1 MS/s 12-bit 30Vrms/60 V DC
Model 8958 16-Ch Scanner Unit 16 20 S/s 16-bit 40 V DC
Voltage, Frequency, Count,
Pulse Duty and Current
Measurements
Model 8940 F/V Unit 2 1 MS/s 12-bit 30Vrms/60 V DC
Voltage and Acceleration
(Acceleration Sensor)
Measurements
Model 8947 Charge Unit 2 1 MS/s 12-bit 30Vrms/60 V DC
Strain (Strain Gauge Type
Converter) Measurements
Model 8939 Strain Unit 2 1 MS/s 12-bit 10 V DC
Model 8960 Strain Unit 2 200 kS/s 16-bit 10 V DC
Refer to the Input Module Guide for specifications.