User Manual

Appendix 6 Disposing of the Instrument
A56
Before Disposing of the Instrument
The instrument contains a lithium battery for memory backup. Remove this bat-
tery before disposing of the instrument.
Also remove the optional Model 9719 Memory Backup Unit, if installed.
(⇒ p. A57)
Appendix 6 Disposing of the Instrument
To avoid electric shock, turn off the power switch and disconnect the
power cord before removing the lithium battery and Model 9719 Memory
Backup Unit (if the option is installed).
When disposing of the instrument, remove the lithium battery and Model 9719
Memory Backup Unit (if the option is installed) and dispose of them in accor-
dance with local regulations.
Lead
Required tools:
Phillips screwdriver, wire cutter
One each
Box wrench or long-nosed pliers
Exploded View
Lithium Battery
Circuit
board
Lithium Battery Removal
1
2
3
4
6
7
8
Only when the optional
printer is installed
1 Verify that the power is off, and remove the connection cables and power cord.
2 Remove the screws and panels as indicated in the above diagram.
3 Pull the lithium battery up from the circuit board, and cut the two leads with a wire cut-
ter.
4 Remove the battery from the board.
5
Screws