User Manual

3.2 Before Operating
56
Setting the Clock
Verify that the instrument’s clock is set correctly, as it is required when applying
timer triggers (⇒ p. 156) and when you need to know when a trigger was applied
(⇒ p. 336).
Set the clock if the time is incorrect.
See "12.3.1 Setting the Date and Time" (⇒ p. 347)
Factory Shipping and Default Settings
When resetting measurement data and settings, you can select which items are
to be reinitialized.
See "12.3.2 Initializing Waveform Data" (⇒ p. 348)
"12.3.3 Initializing System Settings (System Reset)" (
⇒ p. 349)
"Appendix 2.1 List of Default Settings" (
⇒ p. A8)
To automatically save, print or calculate during measurement, you need to
enable them as needed because the factory shipping default for these opera-
tions is disabled (Off).
3.2 Before Operating
3.2.1 Preliminary Settings and Verification