User Manual

3.3 Common Operations
63
7
3
Chapter 3 Operation Overview
See "3.3.4 Mouse Operations" (⇒ p. 68)
When T appears to the right of the setting item
1 Click the mouse on the item to be set.
A pull-down menu appears.
2 Click your setting choice in the pull-down menu.
You can also click the setting choices at F1 to F8.
When T does not appear to the right of the setting item (for text and
numeric entries)
1 Double click on the item to be set.
The virtual keyboard appears. (⇒ p. 64)
2 Click the letters or numbers you want to enter on the virtual keyboard.
You can also click the setting choices at F1 to F8.
See "Appendix 2.8 Keyboard Assignment Table" (⇒ p. A45)
When T appears to the right of the setting item
1 Use the cursor keys (↑ , ↓ , ← and →) on the keyboard to select the item to be
set, and press the Space key.
A pull-down menu appears.
2 Select your choice with the cursor keys (↑ and ↓), and press Enter to accept the
selection.
The same F1 to F8 setting choices are available with the F keys on the key-
board.
When T does not appear to the right of the setting item (for text and
numeric entries)
1 Use the cursor keys (↑, ↓, ← and →) on the keyboard to select the item to be
set, and press the Space key.
The virtual keyboard appears. (⇒ p. 64)
(When F2 [Direct] is displayed in the setting choices, pressing F2 on the key-
board enables direct entry using the keyboard)
2 Direct entry from the keyboard corresponds to the virtual keyboard.
After entering, press the Enter key to accept the entry.
(When using the buttons on the virtual keyboard, press the Space key)
Selecting from a pull-down menu
Pull-Down Menu
ENTER key
SELECT key
CURSOR keys
Move the cursor to the setting item,
and set as follows:
Opens the pull-down
menu.
Select the desired set
-
ting choice.
Accepts the new setting
.
(The SELECT key als
o
accepts the setting)
Using a Mouse
Using a Keyboard