User Manual

3.3 Common Operations
67
7
3
Chapter 3 Operation Overview
You can make entries using a keyboard.
Press the F2 [Direct] key or the F2 key on a connected keyboard to
make entries from the keyboard.
After entering, press the Enter key on the keyboard to accept.
[Text]
[Symbols]
Virtual Keyboard Entry Modes
Parts of the display differ according to entry position.
[List/History]
(Example 1: Analog Comment Entry)
Previously entered comments and lists of measurement units are displayed.
The display depends on the current entry position. New entries appear in empty rows as they ar
e
added to the history, and when all rows are full, the oldest entry is overwritten.
(Example 2: Scaling Unit Entry)
(Example 3: Sheet Name Entry)
CURSOR
(Select Units
)
↓
ENTER
(Apply)
ESC
(Cancel)
Select the desired units from
the pull-down menu.
F1 [SET]
Direct Entry
Pressing F2 [Direct] when no keyboard is connected has no effect, and text can-
not be entered. In this case, press the ESC key to revert to the previous state.