Important Safety Instructions 1. Read these instructions. 2. Keep these Instructions. 3. Heed all Warnings. 4. Follow all instructions. 5. Do not use the speaker near water. 6. Clean only with dry cloth. WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS SPEAKER TO RAIN OR MOISTURE. To reduce the risk of electrical shock, fire, etc.: 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. 21.
22. 23. 24. 25. 26. 27. inside cars in hot weather, where it can be exposed to temperatures in excess of 60℃. Doing so may cause the battery and power supply to generate heat, rupture, or ignite. Using the unit in this manner also may result in a loss of performance and a shortened life expectancy. If the battery is damaged and ignites, do not use water to extinguish flame. Instead, use a functioning fire extinguisher.
Contents Important Safety Instructions ............................................................................................................................... 2 Contents .............................................................................................................................................................. 4 Getting Started.....................................................................................................................................................
Getting Started Carefully remove your speaker from the box. You may wish to store the packaging for future use. What you can find inside of your package Main unit Power adapter Remote control Sling Screw driver Peg (male + female) Plastic spacer x 1 + Screw (30mm) x 1 Instruction manual Positioning your Speaker You can place your speaker on the table or hang on the wall.
4) Take out the Rubber covers (F, G), and then screw Screws (H, I) out by using Screw driver to detach the Stand (J) from unit. 5) Screw Screws (K, L, M) out by using Screw driver. 6) Put the Sling (N) into the groove on the unit, and then screw Screws (K, L, M) in by using Screw driver. 7) Put the Sling into the groove on the Peg (E) and hang the speaker on the peg. # Note: don’t hang other objects on the peg to avoid objects dropping down.
green light slowly. Battery is still charging even speaker is switched off but connecting to mains supply. To switch the unit off completely, unplug the power cord from the mains socket. When speaker doesn’t connect to mains supply, it will run by battery power. Press POWER button to turn the unit on or standby. Press and hold POWER button for 3 seconds to switch unit off. Volume Control Adjust the speaker volume by pressing VOL- and VOL+ buttons.
Buttons and Indicators 1. POWER button Press to switch unit on or standby by. Press and hold for 3 seconds to switch unit off. 2. VOL+ button Press to increase volume. 3. VOL- button Press to decrease volume. 4. MODE button Press to switch among Internet radio, Spotify Connect, Music player, Bluetooth and Aux in mode. 5. POWER indicator 6. WiFi indicator 7. Bluetooth indicator 8. Aux indicator 9. Stand 10.
Connecters 1. USB port For USB playback when inserts a USB disk. For charging mobile device when connects USB cable between speaker and mobile device. 2. Headphones socket 3. AUX IN socket 4. AUX OUT socket It’s for streaming music to external speaker by using an audio cable. 5. DC IN 12V socket Remote Control 1. VOL+ button Press to increase volume. 2. button Press to switch unit on or standby. 3. button Press to skip to previous track in Spotify, Music player and Bluetooth modes. 4.
Replacing battery 1. Put your both thumbs on battery compartment cover and then push and turn anticlockwise to open the battery compartment cover. 2. Insert battery cell and note the positive pole (+ marking). 3. Cover the battery compartment cover and make sure the snap joints are corresponding. 4. Push and turn clockwise by using your both thumbs to close the battery compartment cover.
Setting Speaker For first time switch the speaker on, WiFi indicator is flashing white light slowly. The speaker is waiting for establishing network. 1. Go to ‘Settings’ on your smartphone or tablet, select Wi-Fi and then choose ‘ADCOM-Luna’. 2. Start UNDOK app on your smartphone or tablet (Using iPhone for example), and then tap ‘Set up audio system’ at bottom left corner of screen. 3. Tap ‘Next’.
4. It will ask you to ‘Go to the Settings app on this iPhone/iPad, select Wi-Fi, choose the network of your audio system. Once selected return to the UNDOK.’. If you have done step 1, tap ‘Next’. 5. You can rename your speaker, E.g. My ADCOM-Luna. Tap ‘Next’. 6. Tap to select ‘Wi-Fi’, it will search for Wi-Fi networks. 7. Select your preferred network and then type in password. Tap ‘Next’.
8. Tap ‘Skip checking’. 9. The WiFi indicator will light white once your speaker connected to network. Tap ‘Start using my audio system’ to find your speaker in the list. Make sure your smart phone connect to the same WiFi network as the speaker. Select “ADCOM-Luna xxxxxxxxxxxx” (the 12 digit alphanumeric code is the MAC address of your speaker) from list, now playing screen will show.
Internet radio Mode 1. Tap Internet radio from SOURCE tab to select Internet radio mode. The 2. WiFi indicator lights white. Tap BROWSE tab, you will see: My Favourites Local ‘Country’ Stations Podcasts My Added Stations Help My Favourites You can add your favorite stations to “My Favourites” list. It makes you easier to find the stations that you like. 1. To register your speaker with the portal: www.wifiradio-frontier.com 2. Create account login, enter Access code is required.
Local ‘Country’ Local "Country" will change according to your current location (e.g. Local China). It displays local stations of your current location. 1. Tap BROWSE tab > Local "Country", station genres are listed. 2. Tap your desired genre, and then the station. 3. Now playing screen shows. Stations Stations enables you to select a station from categories: Location, Genre, Popular stations or New stations, or search stations.
Podcasts Podcasts enables you to select a podcast from categories: Location or Genre, or search podcasts. To choose a podcast, tap BROWSE tab > Podcasts, podcast classifications are listed: ‘Location’ enables you to choose from the podcasts provided by any country which you choose from a list. 1. Tap Location. 2. Select your desired region. 3. Select your desired country. 4. Select your desired classification. 5. Select your desired podcast and program.
Help Help enables you get access code and listen FAQ. Tap BROWSE tab > Help, you will see: Get access code: it uses for creating an account when registering your speaker on portal www.wifiradiofrontier.com (Refer to section ‘My Favourites’.) FAQ (Frequently Asked Questions): tap a question to listen. Presets Station Presets enables you to save up to 20 of your favourite stations and you can access your favourite stations quickly and easily. 1.
Spotify Mode What is Spotify Spotify gives you millions of songs at your fingertips. The artists you love, the readymade playlists for every mood and genre, the latest hits and new discoveries just for you. With Spotify Connect feature, you can play and control all this music wirelessly. Choose music on your smartphone or tablet, and listen on your speaker. *For service availability in your country, check www.spotify.com Using Spotify Connect Your speaker has Spotify Connect built in.
4. Tap “Open Spotify” on BROWSE tab to quickly open Spotify app on you smartphone. 5. Play any song in Spotify app. Tap the square image of the song’s cover art in the bottom left of the screen. Then tap the Connect icon 6. . Tap ‘ADCOM-Luna’ from the list. If you can’t see it, just check it’s connected to the same WiFi network as your smartphone.
Controlling Spotify Connect You can now control Spotify from the app like normal; search for and play your tracks, change the volume and add to playlists even though playback is through your speaker. The next time you open the Spotify app, playback will continue through your speaker. Spotify Connect is a cloud-based service, therefore after activation on your speaker, your smartphone no longer needs to be on the same WiFi network to control audio playback.
Sharing Media with Windows Media Player The most common UPnP server is Windows Media Player (10 or later. Viewing version from Help > About Windows Media Player). Alternatively, other UPnP platforms and servers may be used. To set up WMP for media sharing, perform the following steps: 1. Ensure that the PC is connected to the network. 2. Ensure that the speaker is powered on and connected to the same network. 3.
5. Make sure that the speaker has access to the shared media by selecting it and clicking Allow. You can also set a name for the shared media in the box of Name your media library. Click OK to close the dialogue boxes. 6. The PC is now ready to stream the music to the speaker. The WMP UPnP service runs in the background; there is no need to start WMP explicitly. Playing Shared Media 1. In UNDOK app, tap Music player from SOURCE tab to select Music player mode.
3. Select you desired UPnP (Universal Plug and Play) media server - Music/Video Library - Music/Video. When playing music/video, you can: Sharing Shuffle play Repeat play Skip to previous track Skip to next track Play/pause current playing track USB Playback The USB playback feature enables you to play music of MP3, WMA and AAC formats in your USB disk. 1. Insert USB disk to USB port on the unit. 2. Tap BROWSE tab and then select USB Playback. 3. Step by step to find your desired music.
Bluetooth Mode 1. Tap Bluetooth from SOURCE tab to select Bluetooth mode. The 2. Bluetooth indicator flashes blue light. Activate your Bluetooth device and select the search mode. 3. “ADCOM-Luna” will appear on your Bluetooth device. 4. Select “ADCOM-Luna” from device list and enter “0000” for the password if necessary. 5. The Bluetooth indicator lights blue once Bluetooth connected. You can operate your Bluetooth device directly for playback features.
Multi-room Multi-room is a feature that enables you control your speakers (one or group) via UNDOK app for playback. You can enjoy music by using your smartphone which has UNDOK app to control the speakers (multi-room capable devices) in the kitchen, bedroom or living room. Of course you also can control the speakers playing together. 1. If you have more than one speaker (multi-room capable device), you can group them to play synchronously. 2.
c. Device list will appears again and the group will be shown with group name and the devices in the group. Tap on group name to select the group. d. All clients in the group will synchronously play the program which the master device is playing. You can drag the volume control bar to change the master volume for all grouped devices. You also can tap on the volume control and then change volume for each device respectively.
Specification ITEMS SPECIFICATIONS Description: Multimedia speaker Power Adapter: AC Input: 100-240V~, 50/60Hz DC Output: 12V, 2000mA Battery 10000mAh, 7.4V Requirements: Audio Output 10W rms x 2 Power: Power 24W (Max) Consumption: Dimension 345mm x 108mm x 345mm (W x D x H): This symbol on the product or in the instructions means that your electrical and electronic equipment should be disposed at the end of its life separately from your household waste.