User's Manual

ManualsBrandsHip Shing Electronics ManualsElectronicsInternet Radio

.......................................................................... 12 | Page

FM Operation Mode

n To listen to FM radio stations switch BLIK on and

press the MODE button.

n If this is the first time BLIK has been in FM mode,

it will start at the beginning of the FM frequency

range. Otherwise, the last frequency or FM station

will be displayed.

n To scan through the FM frequency range, use

the buttons. To ‘SEEK’ the next active

station, press and hold buttons.

FM Station Presets

n BLIK can store ten FM presets, accessed via the

keypad or remote control.

n To store the current frequency, press and hold

one of the preset buttons.

n To select a stored FM station, simply

press the corresponding preset key.

Using M

Port

n Revo’s M-Port allows for quick and easy

connection of an iPod® (or other MP3 player or

external sound sources).

n Using the connection lead supplied, BLIK™ is

transformed into a high quality digital audio

speaker system.

n Connect one end of the supplied audio lead to the

headphone (or auxiliary out) socket of your

source device, then connect the other end to the

M-Port on the side of BLIK.

n BLIK’s LCD screen will now display the words

“MPort”.

n You should adjust the output volume level on both

the source device and on BLIK itself to gain

optimal volume levels.

Main Menu

Press the buttons to cycle through the

available list. Press the SELECT to select the

chosen station.

Enter this menu, enables you to set Internet Radio,

Music Player, FM, M-Port, Sleep, Alarms, system setup

and Info ect.

whether to start a firmware download or not. A

firmware update can take several minutes, do not

switch BLIK Radiostation off until this procedure has

been completed. Doing so may cause permanently

damage.

Factory Reset

See page 7 for details.

Time setup

See page 8 for details.

This will display a key code that can be used

to register your radio on the Reciva

customer portal: http://www.reciva.com/

Version

and Radio ID

After enter INFO subdirectory, This will display

such information as your device serial number

and hardware/software version numbers. This

information may be requested when dealing with

technical support issues.

irmware

Update

For activation this function, simply enter SYSTEM

SETUP subdirectory is OK, Use this to check

whether there are any firmware updates available

for your BLIK Radiostation radio. BLIK will check,

and prompt you if there is. You can then make the

decision