User's Manual

........................................................................... 9 | Page
General Operation
Changing Volume
To change BLIK Radiostation’s volume, press
the VOL and VOL button, the
numerical volume level will be displayed on
the BLIK’ screen, and BLIK Radiostation will
remember its previous volume level after
shutdown and power-up.
Returning To Main Menu
Simply press MENU button. Alternatively,
Press MODE choice the different mode, except
MPort Mode’, and then You can move back to
BLIK Radiostation’s top-line main menu at any
time by pressing the button and working
back through previous menu.
Internet Radio Presets
BLIK Radiostation can store ten presets by
using the preset keys on BLIK itself, or via the
remote control. To store the current station,
press and hold one of the preset keys (on
BLIK itself or
the remote control). To select a stored station,
simply press the corresponding preset key.
Requesting a Station
If you want to listen to a radio station that is
currently not listed in BLIK Radiostation’s station
list, you can visit the Reciva website at
http://www.reciva.com/ and make a request to
add the station to the list.
Resetting BLIK Radiostation
Performing a factory reset will completely
reset BLIK’s memory, clearing all WEP/WPA
codes and user settings. This will effectively
return BLIK to its default factory settings.
‘Factory Reset’ can be activated from BLIK’s
‘Main Menu’ / ‘System Setup’ menu.
Then the display will prompt you “Press ‘INFO
to confirm reset” ,
Note: If you do not wish to reset the radio,
wait a few seconds without pressing
any buttons and the radio will revert to
its previous operating condition.