User Manual

DC140 2.4GHz Wireless Optical Mouse Page 3 of 6 1.0 Edition
Overview
Hardware Installation Guide (Mouse)
Connect the receiver with computer.
Plug in the USB receiver to any available USB port or hub connected to your computer.
(Windows will now detect the mouse and install the required drivers automatically).
Synchronize the RF Mouse (Pairing)
If the mouse is in sleep mode click the mouse button once to wake it up.
1. Power on the mouse.
2. Bring the mouse within 1 ft range from the receiver.
3. Hold the mouse upside-down and use a pointed object, such as a pen tip, to click the
CONNECT button (ID button) twice.
CLICK ANY BUTTON, YOUR MOUSE IS NOW READY TO BE USED
Note: * During normal use, please make sure that the mouse is no more than 5M away
from the receiver in order to have reliable connection.
Button #1 – Left mouse click
Button #3 – Centre scroll
wheel
Button#2–Right mouse click