Owner manual

Hiro H50113
24
Command Function
E0
Disables echo command.
E1
Enables echo command (default).
B<value>—Communication Standard Setting
Use this command to select the communication standard used by
the soft modem.
Result codes:
_ OK if <value> = 0—3, 15, 16.
_ ERROR if <value> ≠0—3, 15, 16.
Command Function
B0
Selects CCITT V.22 mode when the modem is at
1200 bits/s.
B1
Selects Bell 212A when the modem is at 1200
bits/s (default).
B2
Deselects V.23 reverse channel (same as B3).
B3
Deselects V.23 reverse channel (same as B2).
B15
Selects V.21 when the modem is at 300 bits/s.
B16
Selects Bell 103J when the modem is at 300
bits/s (default).