User manual

SPIDER II
Release 04 09/09
21
Figure 8: Port status LEDs for F/O ports on the top edge of the front of the device
1 – No port status LEDs for devices without F/O ports
2 – One port status LED (LS/DA) for devices with one F/O port
3 – Two port status LEDs (LS/DA) for devices with two F/O ports
Figure 9: Port status LEDs for TP ports
1 – Port status LEDs for Fast Ethernet TP ports
2 – Port status LEDs for Gigabit Ethernet TP ports
2.3 Disassembly
2.3.1 Removing the device from the DIN rail
 SPIDER II without PoE
 To take the device off the DIN rail, insert a screwdriver horizontally un-
der the housing into the locking slide, pull it (without tipping the screw-
driver) downwards and lift the device upwards.
LED Display Color Activity Meaning
LS/DA Link status
data
Green Lights up Valid connection
Flashing Data traffic
None No valid connection
100 Data rate Yellow Lights up 100 Mbit/s connection
None 10 Mbit/s connection
SP Data rate Yellow None No valid connection
Flashing 1 time a period 10 Mbit/s connection
Flashing 2 times a peri-
od
100 Mbit/s connection
Flashing 3 times a peri-
od
1000 Mbit/s connection
6
7
312
9
SP
1 2