User's Manual

Hisense Pulse with Google TV Remote Control
9 10
Battery Specification
AAA 1.5V
*
3 , Alkaline battery
The LED on the remote control will blink with each key press and
while the touchpad is in use.
In pairing mode, the LED will light continuously for ~60-seconds.
When pairing is complete, the LED will flash three times.
The LED light will blink continuously when the battery is low.
Sleep ModeTo conserve battery life, the remote control will
automatically go into sleep mode thirty seconds after the last key
press. Any movement or key press will immediately wake up the
remote.
Green LED indicator
6) Use up (/\) or down (\/) arrow keys to highlight Hisense Pulse Remote
Control (if the remote had been previously paired) or Find nearby
devices (if the remote has not previously been paired) and press OK
key.