Remote control operation Change the batteries 1 Open the battery cover on the back of the remote control 2 Install two AAA size (1.5V) batteries. Match the + and signs on the batteries to the signs on the battery compartment. 3 Closes the battery cover. Note 1 if tha marmots still doss not function normally or cannot control the TV, try replacing the batteries again with new batteries.
Brief operation of the remote control IER Full Screen 4:3 Zoom 1 Zoom 2 Panorama Dot by Dot €. Sleep: It can set the TV to let it enter into the Standby state automatically, Press this button repeatedly to select the proper sleeping clock mode, and the clock tells you the remaining time before the TV enters Standby state. The clock mode is as follows: Off-10minutes-20minutes30minutes... minuteness. 7. Zoom: For the various Sources, this unit has set various display modes.
Basic operation Turning the Power bunion on/off 1 Connect tha TV power line to the AC outlet. 2 Press the Power button on the TV set. When the TV is switched on, press the Power button on the remote controller to enter a Standby state. Press this bunion again for a nominal view. 3 Press the Power bunion again to furn off the TV. Note: € In order to reduce power consumption, you can set the TV in a Standby state.
pe To set the channels: 1 Press Menu button fo display the main menu. ll 2 Press the wjA button fo select Channel tem. 3 Press the »/OK button to enter Channel menu. 4 Press the wA bunion to select the option, press a fos the p/CK button to enter or press the
ee To adjust the picture: 1 Press Menu bunion to display the main menu. 2 Press the wa button fo select Picture tier. a 3 Press the b/0K button fo enter Picture menu. Sharpness 4 Press the ¥14& bunion fo select the option, Gd : Sol Smith Ea pass the »/OK button to enter or press 5B enhanced Setting ja SERIES the «f» button to adjust the option. §.When you ars finished, press the Menu button fo close The options are: the menu.
Screen sailing To adjust the screen image: 1 Press Menu button to display the main menu. Er 2 Press the wja bunion to select Screen item. > 3 Press the »/OK button to enter Screen menu. mm 5 Re RRR 4 Press the 914 button fo select the option, press pd oa the b/OK button to enter or press the «4p button to adjust the option. 5.When you are finished, press the Menu button fo close the menu. Ceilidh Zag The options are: © Image Position: Adjusts the position of image on screen by press the ¥/4 /
Lapidary To set the parameters: 1 Press Menu button to display the main menu. 2 Press the 94 bunion to select Function item. iE < 3 Press the »/CK bunion to enter Function menu. FEET a 4 Press the 74 bunion to select the option, press on fst ' the B/OK button fo enter or press the «
Ele al About PAMPAS Rating: The Motion Picture Association of Americanism) uses a rating system to qualify motion picture content. Television broadcasters employ a rating system to qualify the content of television programs as well The PAMPAS and TV ratings work with the V-CHIP feature, which allows you fo block out certain Programs.
bee Wall Bracket installation Instruction Unit Dimension(unit: mm) Screw Diameter Screw Length(unit: mm} 100x100 M4 10 Remark: The specification of screw is just used on the back cabinet. NOTE: Wall mount bracket Is not Included with TV and mounting of wall mount bracket to wall may vary depending on brand and size of bracket Customer should consult bracket mounting instructions that came with wall mount for specific information on how to mount bracket to wall. Removing TV Stand 1.
Lib pte ee ee Attentions 1. Do not attempt to install the TV by yourself. Refer all installation fo qualified servicing personnel. 2. Bo not install the TV on a sloping wall that makes the TV screen slant over 10 degrees from the vertical or it may fumble. 3. Before installation, examine whether the wall conforms fo the specifications and whether the supplied parts can be fixed io it. e.g. comet wall or brick wall.
Should you experience a problem with the TV, first turn off the TV, unplug the power cord from its electrical outlet for at least 10 seconds. After 10 seconds restore power fo the TV and tum on.You can also according to the following chart. If the problem still exists, please contact our customer care number where they will be happy to assist. No sound or picture 1.Check to see if the TV power outlet has power, Plug ina lamp to test for power. If no power, check your circuit breakers or power fuses.