LCD TV USER ' S MANUAL Before using the TV, Please read this manual thoroughly, retain it for future reference. LHDN3 2V8 8MH Part NO.
Table of contents Important safety instructions and Environment Important safety instructions Environment 2 2 4 Setting up 5 Pedestal installation instruction Locating TV buttons and connectors Connection to other devices 5 6 8 Using the remote control 11 11 12 Identifying the remote control buttons Brief operations of the remote control Basic operation 12 Power on/off Changing channels/volume Startup Menu settings Select input source Change picture mode Change sound mode Still picture Mute sound
Important safety instructions Important safety instructions CAUTION CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER(OR BACK).NO USERSERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock.
Important safety instructions Important safety instructions 13. UNPLUG THIS APPARATUS DURING LIGHTNING STORMS OR WHEN UNUSED FOR LONG PERIODS OF TIME. 14. REFER ALL SERVICING TO QUALIFIED SERVICE PERSONNEL. SERVICING IS REQUIRED WHEN THE APPARATUS HAS BEEN DAMAGED IN ANY WAY, SUCH AS POWER-SUPPLY CORD OR PLUG IS DAMAGED, LIQUID HAS BEEN SPILLED OR OBJECTS HAVE FALLEN INTO THE APPARATUS, THE APPARATUS HAS BEEN EXPOSED TO RAIN OR MOISTURE, DOES NOT OPERATE NORMALLY, OR HAS BEEN DROPPED. 15.
Important safety instructions Important safety instructions 23. REPLACEMENT PARTS: When replacement parts are required, be sure the service technician uses replacement parts specified by the manufacturer that have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock, injury to persons or other hazards. 24.
Important safety instructions and Environment Environment WEEE (Waste Electronic Electric Equipment) European Directive 2002/96/EC & 2003/108/EC The symbol of the barred dustbin means that this apparatus cannot be put at the rebus with other current domestic waste. Some components may be harmful to the environment. Do not throw away with domestic waste, to deposit it on the public domain or any other site which is not used for this purpose. Contact your local authority to know the place of collection.
Setting up Pedestal Installation Instruction 1. Lay the soft froth on the table which can hold enough weight of the whole TV in case of causing damage to TV or person. 2. Put the TV on the froth ,with its back upwards and the LCD downwards. 3. Take out the pedestal, and insert the pedestal into the TV suitably, then put the pedestal to relevant position of the TV set until all the holes match each other completely. 4. Fasten the pedestal and the TV set together with screws. 5.
Setting up Locating TV buttons and connetors Note: The below figures are for reference only, please refer to the actual units to determine the appearance. 1 2 3 4 5 7 6 NO. TV(front) 1 Menu 2 Source 3 VOL /VOL 4 CH 5 6 7 / CH (Standby) Description Display the onscreen display(OSD) or Exit to close the OSD. Select the input source. Press Source to open the list of input sources. And the button will be as the OK function when display the OSD. Raise or lower the sound level.
Setting up PR PB Y L R MPI ANT IN USB Locating TV buttons and connetors HDMI1 COMP2 Y DIGITAL AUDIO OUT PB PR L R L R VIDEO L AUDIO OUT AV 8 HEADPHONE R SERVICE S-VIDEO PC AUDIO HDMI2 HDMI4 HDMI3 VGA COMP1 AC INPUT
Setting up Connect to other devices Warning: Before connecting the TV to any other electronic device, unplug the TV and electronic device AC cords from the AC input. Not all following terminals are included on your TV. The actual one refer to the part of “Locating TV buttons and connectors” 1. Connect to broadcast antenna or the cable TV To have an optimal picture quality, it is strongly recommended to have an external antenna or a cable TV.
Setting up S-VIDEO Connect to other devices The equipment with S-Video output function ( such as VCD, DVD, set-top boxes, etc.). R Red L White 3. Connect to devices with Component interface Component video(Y, Pb, Pr)transmits video as separate Y, Pb, Pr signals. Use this connection for high-definition video signals from a DVD or other equipment.
Setting up Connect to other devices PC AUDIO VGA 6. Connect to PC Connect the D- Sub cable to “VGA” on the rear of your set and the other end to the Video Card of your computer. Connect the stereo audio cable to “PC AUDIO ” on the rear of your set and the other end to “Audio Out” of the sound card on your computer. Computer HEADPHONE 7. Connect to headphone Connect the headphone jack of the TV set. The volume of the headphone is automatically adjusted with the main volume of the TV set.
Using the remote control Identifying the remote control buttons Remote sensing window TV Source Select input source Enter TV source Power on/off Direct channel selection 1 2 3 4 5 6 7 8 9 0 Inf o Picture Sound Dash button Recall Display the current channel number Reverts to the previously selected channel Select picture mode Volume increase Volume decrease Select sound mode Mute button VOL CH Menu Exit Menu button Turn to the upper menu / / / OK control the cursor in the menu
Using the remote control Brief operations of remote control Change the batteries 1. Open the battery cover on the back of the remote control. 2. Install two AAA size (1.5V) batteries. Match the “+” and “-” signs on the batteries to the signs on the battery compartment. 3. Close the battery cover. Note: 1. If the remote control doesn't work normally, unstable, or cannot control the TV, please replace the batteries. 2. If you do not use the remote control for a long time, remove the batteries.
Basic operations Changing Channels/ Volume 1. Press [CH / ] button on the remote control, you can change the channels. (Press [VOL / ]button to raise or lower the volume). 2. Press [CH / ]button on the front panel of the TV set, you can also change the channels. (Press [VOL / ] button to raise or lower the volume). 3. Press the numeric buttons on the remote control to display the corresponding channels. Note: Changing the channels can also be achieved by directly pressing the programme No.
Basic operations Change view ratio For the various Sources, this unit has set various display modes. Press Zoom button to display Zoom menu, including ''Auto”, "Full Screen", ''Normal", "Zoom 1", "Zoom 2", "Smart Zoom”, “Panorama”. ◇ Normal: Shows the standard 4:3 ratio picture image in the center of the TV with dark bars on the left and right. ◇ Full Screen: This mode display the picture of input source expanded to fill the screen.
Changing the TV settings TV settings TV 1 2 3 4 Closed Caption Tuner Source Air Auto Scan No Parental Control [ /OK] button to enter or press [ /Exit] button to exit. 5.When you are finished, press the Menu button to close the menu. Update EPG Select: Press Menu button to display the main menu. Press [ / ] button to select TV item. Press [ /OK] button to enter TV menu.
Changing the TV settings ◇ US TV Rating: The TV ratings are divided into two groups: age-based and content-based.
Changing the TV settings Picture settings Picture Preset Mode User Brightness 50 Contrast 50 Saturation 50 Hue 48 Sharpness 20 Backlight 6 Color Temperature Neutral Video Reset No Select: Enter: OK Return: Exit 1 2 3 4 Press Menu button to display the main menu. Press [ / ] button to select Picture item. Press [ /OK] button to enter Picture menu. Press [ / ] button to select the option, press [ /OK] button to enter or press [ / ] button to adjust the option. 5.
Soundsetting setting Sound Audio settings 1 2 3 4 Audio Mono MTS Digital Audio Speaker Both Balance 0 [ /OK] button to enter or press [ / ] button to adjust the option. 5.When you are finished, press the Menu button to close the menu. Audio Setting Virtual Surround Select: Enter: OK Press Menu button to display the main menu. Press [ / ] button to select Audio item. Press [ /OK] button to enter Audio menu.
Changing the TV settings Power settings TV ON/OFF Time: Adjusts the TV ON/OFF time. ◇ Auto Synchronization: Auto adjusts the system time in DTV mode only. ◇ Date/Time: Sets the date/time by number buttons. ◇ Power On Timer: When select “on”, sets the TV ON time by number buttons. ◇ Power Off Timer: When select “on”, sets the TV OFF time by number buttons. Power Mode: Adjusts saving mode. E. Saver mode will be more energy-efficient.
Changing the TV settings Hotel menu settings Hotel Settings HOTEL MODE 1 2 3 4 On TV ON SETTING FUNCTION LOCK MAX VOLUME Both MIN VOLUME 0 AUTO STANDBY On [ / ] button to adjust it to 0. and press 5、 4 、8 buttons to enter hotel menu. CHANNEL SETTING RSR ENABLE No SET SSID CLONE Select: READ OUT Enter: OK Return: Exit Press Menu button to display the main menu. Press [ / ] button to select Audio item. Press [ /OK] button to enter Audio menu.
Changing the TV settings Hotel menu settings MAX VOLUME: Sets the maximum volume. MIN VOLUME: Sets the minimum volume. AUTO STANDBY: If it setted to [On], the TV will auto standby if no input signal for 15 minutes. CHANNEL SETTING: Sets and edits channels. ◇TUNER SOURCE: Selects source of tuner, including CABLE, HRC, IRC, AIR. ◇AUTO SCAN: Searches the channels automatically. ◇PROGRAM GUIDE EDIT: Edit the channels, Including: ◆Rename the channel: Press Red button to change the name of the selected channel.
Appendix Specification Model Name Dimension Without (W×H×D)(mm) With Weight(kg) Without LHDN32V88MH stand stand 788×511×101 788×561×252 stand 12 With stand 14 LCD Panel 81 Minimum size( diagonal) Screen resolution Power consumption Audio power Power supply 1366×768 140W 7W+7W Refer to rating label Receiving systems RF NTSC/ATSC AV NTSC 480I /60Hz、480P /60Hz、 Component Input 720P/60Hz、1080I/60Hz 1080P/60Hz VGA Input VGA（640×480 60Hz）、 SVGA（ 800×600 XGA （1024×768 60Hz） 60Hz） R
Appendix Trouble shooting When there is something wrong with your TV, you can try turning off the TV and then restart it. You can also operate according to the following chart. If the problem still cannot be solved, please contact the professional technicians. No sound or picture 1. Check if the power line is in the outlet and if it has electricity. 2. Check if you have pressed Power button on the TV or Power button on the remote control. 3. Check the setting of picture brightness and contrast. 4.
