User's Manual

Video in(composite video) transmits video as a single signal.
VCD, DVD, set-top boxes, etc.
9
Red
White
Yellow
L
VIDEO
R
AV
1. Connect to broadcast antenna or the cable TV
To have an optimal picture quality, it is strongly recommended to have an external antenna or a
cable TV.
Note:
n It is recommended that coaxial cable (75 ) be used to eliminate the interference caused by the
mismatched impedance.
n The antenna cable should not be bound together with the power cord.
n When using the cable TV, please insert the plug of the coaxial cable (75 ) directly into the
antenna outlet.
Warning: Before connecting the TV to any other electronic device, unplug the TV and
electronic device AC cords from the AC input.
Not all following terminals are included on your TV. The actual one refer to the part of
“ ”Locating TV buttons and connectors
2. Connect to AV devices
Connect a Video RCA cable to an appropriate external A/V
device such as a VCR, DVD or Set-top boxes.
Connect RCA audio cables to “R - L(audio)” on your set and the other ends to corresponding
audio out connectors on the A/V device.
your set and the other ends to
Setting up
Connect to other devices
S-video transmits video in separate color and black-and-white image signals and delivers a
sharper image than a composite video connection.
Connect a S-Video cable to your set and the other ends to an appropriate external A/V device
such as a VCR, DVD or Set-top boxes.
Connect RCA audio cables to “R - L(audio)”(AV) on your set and the other ends to
corresponding audio out connectors on the A/V device.