User's Manual

5. Connect to
Only updating the software for maintenance man.
devices with USB interface
Component video(Y, Pb, Pr)transmits video as separate Y, Pb, Pr signals. Use this connection for
high-definition video signals from a DVD or other equipment.
Connect Component video and audio cables to Component inputs (“PR/CR”, “PB/CB”, “Y”) on
the rear of your set and the other ends to corresponding component video out connectors on the
PVR or DVD.
The Y, PB/CB and PR/CR” connectors on your component devices (PVR or DVD) are
sometimes labeled Y, B-Y and R-Y or Y, CB and CR. (Colors for inputs and cables must
correspond on both devices.)
3. Connect to devices with Component interface
L
R
Y
Audio L
Audio R
Red
Red
White
Blue
Green
DVD With Component jacks
4. Connect to devices with HDMI interface
HDMI transmits an all-digital signal and is the recommended choice for playback from a digital
DVD or DVR. No sound connection is needed for HDMI to HDMI connection.
HDMI cable connected to the HDMI connector on the TV.
The equipment with HDMI output jack
( such as DVD players, set-top boxes, etc.).
HDMI
USB
PR/CR
PB/CB
10
S-VIDEO
L
R
The equipment with S-Video output
function ( such as VCD, DVD, set-top
boxes, etc.).
Red
White
Setting up
Connect to other devices