User's Manual

Change the batteries
1. Open the battery cover on the back of the remote control.
2. Install two AAA size (1.5V) batteries. Match the “+” and “-” signs on the batteries to the signs
on the battery compartment.
3. Close the battery cover.
Note:
1. If the remote control doesn't work normally, unstable, or cannot control the TV, please replace
the batteries.
2. If you do not use the remote control for a long time, remove the batteries.
The effective range of remote control
1. The remote control distance: 8 meters in front of the TV set.
2. The remote control angle: taking the television infrared light receiver window as an apex, 6
meters away, its controlled angle (left to right) is within 30 degrees, while the vertical angle
(up to down)is within 30 degrees.
13
Using the remote control
Brief operations of remote control
Basic operations
Basic operations
1.
2.Connect the TV power line to AC outlet.
3. Press the Power button on the TV set. When the TV is on, press the Power button on the
remote control, and the TV will enter Standby state. Press this button again, and you can watch
TV normally.
4. Press the Power button again to turn off the TV.
Note:
In order to save power consumption, set the TV in Standby state if you do not watch TV for a
short time, if you do not watch TV for a very long period of time, shut down the main power of the
TV.
If the TV is turned off , to turn it on agin, please wait at least 5 seconds in case the abnormal
phenomena occurred.
Connect the Power Cord to the connector on the back of the TV, if the Power cord in
accessories. When connecting the power cord to the connector of the TV, make sure the power
cord is fully inserted in the place. Bad contact may cause high temperature of the connector and
the risk of fire or other damages
Power on/off