User's Manual

MAX VOLUME: Sets the maximum volume.
MIN VOLUME: Sets the minimum volume.
AUTO STANDBY: If it setted to [On], the TV will auto standby if no input signal for 15 minutes.
CHANNEL SETTING: Sets and edits channels.
◇TUNER SOURCE: Selects source of tuner, including CABLE, HRC, IRC, AIR.
◇AUTO SCAN:
◇PROGRAM GUIDE EDIT: Edit the channels, Including:
◆Rename the channel: Press Red button to change the name of the selected channel. Press
[ / ] button to adjust the token of the name. Press Red button to confirm or Green button to
cancel.
◆Skip the channel: Press Green button to select skip function; press Red button to confirm. If
you want to cancel skip, select this channel and press Green button; press Red button to
confirm.
◆Delete the channel: Press Blue button to select delete function, and then press Red button to
confirm.
◆Copy the channel: Press Yellow button to select copy function. Then press [ / ] button to
move to the desired position and press Red button to confirm.
◆Swap the channels: If you want to change the order of the programs, press [ ] button; press
[ / ] button to move to the desired position, and then press [ ] button to confirm.
RSR ENABLE: If it setted to [On], activate “Virtual Surround” function.
SET SSID(Session Identification): The SSID is provided by the PPV system provider. This
session identification information must be forwarded to the Pro:Idiom device (Hotel TV) to enable
decryption. The SSID is used each time an encrypted channel is tuned and it must contain 20
bytes of information.
CLONE:CLONE feature, you can copy the state of the machine to another machine.
Operation is as follows: First insert U disk, and then enter HOTEL MENU, select READ OUT , the
YES option is OK to confirm the next point , after the completion of READ OUT action.
At this point the previous U-disk into the state of the machine need to be copied into the HOTEL
MENU, select WRITE IN , the YES option is OK to confirm the next point, after the completion of
WRITE IN action, the whole auto-CLONE completed after rebooting.
Note: When Use the clone function, the equipment (U disk, etc.) must be connected to the
USB interface.
Searches the channels automatically.
Changing the TV settings
Hotel menu settings
22