> Connect to other devices Warning: Before connecting the TV to any other electronic device, unplug the TV and electronic device AC cords from the AC input. Not all following terminals are Included on your TV. The actual one refer to the part of “Locating TV buttons and connectors” 1. Connect to broadcast antenna or the cable TV To have an optimal picture quality, it is strongly recommended to have an external antenna or a cable TV.
> Connect to other devices 5. Connect to PC # Connect the D Sub cable to “VGA” on the rear of your set and the other end to the Video Card of your computer. # Connect the stereo audio cable to “PC AUDIO " on the rear of your set and the other end to “Audio Qut” of the sound card on your computer. z O0@ [IM tmemsmsmsmsmsasases 2H g Computer 6. Connect to headphones ## Connect the headphone jack of the TV set # The volume of the headphone Is automatically adjusted with the main volume of the TV set.
Using the remote control > identifying the remote control buttons — Remote sensing window Power on/off Select AV Component.
Using the remote control >= Brief operations of remote control Change the batteries 1. Open the battery cover on the back of the remote control. 2. Install two AAA size (1.5V) batteries. Match the and signs on the batteries to the signs on the battery compartment. 3. Close the battery cover. Note: 1. If the remote control doesn't work normally, unstable, or cannot control the TV, pleads replace the batteries. 2. If you do not use the remote control for a long time, remove the batteries.
Ele ete >> Change sound mode It can be set as Standard, Speech, User and Music. This mode achieves a special sound effect by setting equalizer. >= Mute sound Press [Mute] button to tum the sound off, press this button again to tum the sound back en. This function Is used to switch off sound temporarily.
Changing the TV settings >= Using the TV Menu Tuner Mode Antenna Press Menu button to display the main menu. 2 Press [ar] button to select TV item. 3 Press [P/ENTER] button to enter TV menu. 4 Press [ar] button to select the option, press P/ENTER] button to enter of press button to exit. 5 When you are finished, press the Menu button to close the menu. Adjust MENU Back You can adjust: Channel Scan eh a Sho Antenna. # Tuner Mode — Select the TV signal source. You can select Antenna or Cable.
Changing the TV settings >= Using the Video Menu 1 Press Menu button to display the main menu. Picture Mods a 2 Press [arw] button to select Video item mle : >, 3 Press [D/ENTER] button to enter Video menu. Eo ne 4 Press [a/v] button to select the option, press P/ENTER] button to enter or press [4/Exit] bitten to exit. 5 When you are finished, press the Menu button to close the menu. LITE You can adjust: # Posture Mode Adjusts the Picture Mode. You can select Standard, Cinema, User or Vivid.