32D77W 42D77W www.hisense-usa.com service@hisense-usa.
The lightning flash with arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the to constitute a risk of electric shock. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
II
Important Safety Instructions 19.
Important Safety Instructions HOW TO HANDLE THE LCD PANEL: End of life directives Do not press hard or jolt the LCD panel. It may cause the LCD panel glass to break and injury may occur. If the LCD panel is broken, make absolutely sure that you do not touch the liquid in the panel. This may cause skin inflammation. If the liquid gets in your mouth, immediately gargle and consult with your doctor.
Important Safety Instructions INFORMATION ACCESSED OR OBTAINED VIA HiSmart IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OF NON INFRINGEMENT. SOME JURISDICTIONS DO NOT ALLOW FOR THE EXCLUSION OF IMPLIED WARRANTIES, SO THE ABOVE EXCLUSIONS MAY NOT APPLY TO YOU. Disclaimer: Hisense USA companies ("Hisense").
Contents Getting Started Accessories List............................................................................................... 3 Installing the Stand .......................................................................................... 3 Installing a Wall-Mount Bracket ....................................................................... 4 When Installing the TV Against a Wall or Enclosed Area ................................ 5 Viewing the Control Panel ....................................
Contents Advanced Features Network Function............................................................................................ 24 Enter the Network Applications....................................................................... 25 VUDU HD Movies ........................................................................................... 25 VUDU Apps .................................................................................................... 27 .....................................
Getting Started Accessories List USER MANUAL User Manual Screws: Quick Setup Guide Warranty Card Quick Setup Guide Warranty Card Screws for 32" (ST4×L16)×3 Remote Control Battery × 2 Screws for 42" (M6×L12)×4 Installing the Stand NOTES 1. The LCD display is very fragile, and must be protected at all times when removing the base stand. Be sure that no hard or sharp object, or anything that could scratch or damage the LCD display, comes into contact with it.
Getting Started . 42D77W 1. Take out the base and insert it into the installing slot in the lower part of the TV until all of the holes match each other. 2. Fasten the base and the TV set together with the 4×(M6×L12) screws provided. 1 2 Installing a Wall-Mount Bracket If you want to attach the TV to a Wall-Mount bracket (not provided), you should first remove the stand if it is pre-attached . 1. Place the spacers (not provided) in the corresponding bracket holes. Attach purchased bracket (1.5 ~ 2.
Getting Started 6.5 ~ 7.5 mm Wall-Mount Bracket Screw Spacer the TV's rear cover When Installing the TV Against a Wall or Enclosed Area Make sure that your TV has adequate air circulation. Allow enough space around the TV as shown below. Avoid operating the TV at temperatures below Inadequate air 41°F (5°C).
Getting Started Viewing the Control Panel ,1387 Power indicator Remote sensor item Description Power Sensor Receives remote signals from the remote control. Do not put anything near the sensor, as its function may be affected. Power Indicator Light up in standby mode. MENU Open or close the OSD menu INPUT Select among the different signal sources. CH Select the channel !#$ !#$ Adjust the volume. Standby button Turn on the TV or put the TV in standby mode.
Getting Started Viewing the Remote Control Battery indicator Power on/off Select input source Invalid button Direct channel selection Dash button (use when entering a digital sub-channel ) Go to the previous channel $ % Enter the internet Apps and Digital Media Player Channel Up Launch Vudu Movies App Increase Volume Decrease Volume Channel Down Audio Mute button Return to the previous menu Menu button / / Navigate Up/Down/Left/Right or adjust on-screen menu settings
Getting Started Installing Batteries in the Remote Control 1. Slide the back cover to open the battery compartment of the remote control. 2. Insert two AAA size batteries. Make sure to match the (+) and ( - ) ends of the batteries with the (+) and ( - ) ends indicated in the battery compartment. 3. Close the battery compartment cover. 1 Gently push and slide 2 Insert the batteries 3 Gently push and slide NOTES 1. Dispose of your batteries in a designated disposal area.
Getting Started USB ANT/CABLE IN LAN DC5V USB 0.5A(MAX) Making Connections LAN L R ANT/CABLE HDMI DIGITAL AUDIO OUT HDMI PR COMP PB Y R L PC/DVI AUDIO IN HDMI PC IN Power input HDMI3 HDMI2 DIGITAL AUDIO OUT PC/DVI AUDIO IN HDMI1 HDMI4 AV VGA VGA VIDEO VIDEO COMPONENT HDMI HEADPHONE HEADPHONE Item Description ANT/CABLE IN Connect an antenna or cable TV to this jack.
Getting Started NOTES Check the jacks for position and type before making any connections. Loose connections can result in image or color problems. Make sure that all connections are tight and secure. Not all A/V devices have the ability to connect to a TV, please refer to the user’s manual of your A/V device for compatibility and connections procedure. Always unplug the power cord when connecting external equipment. Connecting an antenna, cable or cable/satellite box 1.
Getting Started Connecting an A/V Device with Component (YPBPR) Cable 1. Use a component cable to connect the external A/V device’s component output jacks to the TV’s YPBPR jacks. Use an audio cable to connect the external A/V device’s component audio jacks to the TV’s AUDIO (L/R) jacks. 2. Plug the connected devices into the mains socket before switching on the TV. 3. Select the corresponding source from the TV.
Getting Started Connecting a PC with VGA Cable 1. Use a VGA cable to connect the PC’s VGA output jack to the TV’s VGA jack. Use an audio cable to connect the PC’s audio output jack to TV’s PC/DVI AUDIO IN jack. 2. Plug the connected devices into the mains socket before switching on the TV. 3. Select the corresponding source from the TV. EXTERNAL DEVICES PC/DVI AUDIO IN PC IN VGA TV JACK Computer NOTES Primarily this unit is intended for use as an LCD TV.
Basic Features Turning the TV on or off Choose your Picture Mode IMPORTANT: At first, you have to match the remote control with TV. To turn your TV on or off (standby mode): 1. Plug the power cord into an AC power outlet. 2. Press [POWER] button or use the Tap Pad located on the TV (see “viewing the control panel”). Your TV turns on. 3. Press [POWER] button again to turn off your TV. When you turn off your TV, it goes into standby mode.
Basic Features Changing Channels / Volume DISPLAY - Display the information banner. The information including channel number, channel name, current system time, tuner mode, audio stream, video format, audio language, closed caption mode, parental locks rated, program details, etc. V 1. Press the [CH /V] (or [CH +/-]) on the TV/remote control to change the channel. 2. Press the [VOL /V] (or [VOL +/-]) on the TV/remote control to adjust the volume. 3.
Basic Features To Use the Menu 1 Press the [Menu] button to open the main menu. 2 * < ] to select a menu option, then press Picture 3 In each menu, you can: < ] to select an item, * Standard Picture Mode Brightness Contrast Color Tint Sharpness Advanced Video [ /ENTER] to enter the menu. Press [ / ] to adjust the value, or 50 50 50 0 10 Adjust image to suit personal preferences. Press [ /ENTER] to enter the submenu, Press [RETURN] to exit the submenu.
Basic Features Using the Channels Menu Audio 0 10DB 0 0 0 0 Channels -10DB 120Hz 500Hz 1.5KHz 5KHz 10KHz Adjust Select Antenna Tuner Mode Auto Channel Search Channel Skip Favorite List MTS Audio Language 0DB Stereo English Select tuner connect mode. Back Bass Boost - Adjust the bass performance. Select Sound Surround - Simulates surround sound and enhances bass response. Back You can adjust: Digital Audio Output - Send digital audio to an external audio system.
Basic Features Using the Settings Menu Sleep Timer: Specify the amount of time before your TV automatically turns off: Off -10-...-120 minutes. Caption - Adjust Closed Captioning settings. Settings Caption Control: Select the Closed Caption mode: CC Off, CC On or CC On When Mute. English Language Menu Settings Time Setup Caption Network Demo Mode Version Info Reset Default Analog Closed Caption: Select an Analog Caption setting: Adjust OSD language.
Basic Features Using the Lock Menu U.S. TV Ratings When you first use this function, the default password is [0000]. Once you input this password, you can set options. Lock Channel Block Program Block Input Block Change Password Clean All Prevent access to TV services.
Advanced Features Network Connection You can set up your TV so that it can access the Internet through your local area network (LAN) with a Ethernet or wireless connection. Connecting to a Wired Network You can attach your TV to your LAN by one of the three following ways: You can attach your TV to your LAN by connecting the LAN port on the back of your TV to an external modem using a Cat 5 LAN cable. See the diagram below.
Advanced Features directions to enable automatic IP addressing by DHCP. Or, follow the steps listed to the follow to manually configure the network connection. Network Setup (Auto) Use the Automatic Network Setup while your connecting the TV to a network that supports DHCP. To set up your TV’s cable network connection automatically, follow these steps: How to set up automatically Network Setup (Manual) 1. Connect your TV to your LAN as described in the previous section.
Advanced Features Connecting to a Wireless Network To connect your TV to your network wirelessly, you need a wireless router or modem. See the illustration below. Wireless IP Sharer(Router) The LAN Port on (with DHCP Server) the Wall Wireless LAN Adapter built-in TV set LAN Cable Hisense’s built-in Wireless LAN Adapter supports the IEEE 802.11 b/g/n communication protocols. Hisense recommends using IEEE 802.11n router. When you play the video over a IEEE 802.
Advanced Features (push button configuration) setup. Choose the method supported by your wireless access point. Wireless Setting How to set up 8a. If you choose PIN, an identification number will appear on the screen for you to enter into the access point. After *^ <`\ ^ *^ by another device, select [REFRESH] to obtain a new PIN and enter it into the access point. After entering the *^ <`\ 1.
Advanced Features To set up your TV’s network connection manually, follow these steps: 1). Follow Steps 1 through 5 in the “How to set up automatically” procedure. 2). Set Address Type to Manual. Settings Address Type IP Address Subnet Mask Default Gateway Primary DNS Secondary DNS 0. 0. 0. 0. 0. Select Manual 0. 0. 0. 0. 0. 0. 0. 0. 0. 0. 0 0 0 0 0 3. The “Add To Library” will pop up on the screen. Click “Add”. Back 8. Set Address Type to Manual, enter IP Setting. Then < >\ ^* %
Advanced Features Network Function NOTICE FOR USE 1. 2. 2. Click the box to select “Share my media” and click [OK]. 3. 4. 3. An equipment icon will appear on the white area if the DLNA Settings has been correctly set. Select the appropriate icon and then click “Allow”. 5. 6. 4. The TV now has access to the shared files on the computer. 24 If you use VUDU services, see the following note before using it.
Advanced Features Enter the Network Applications Operational buttons 1. Press the [Hi-Smart] button to display network main menu. 1 3 4 2 5 2. * < > _ `\ want to view and press [ENTER] to enter the following description. No 1 2 3 4 5 Buttons Description Interface description The current signal The Hisense advertisement Hisense market Network options Source options Press to launch Vudu Movies App directly.
Advanced Features 4. Please read the content of the Disclaimer first. If agree, 2. Press [ENTER] button to display the keyboard. There are some shortcuts on the bottom of the keyboard so that you can input part of the address often used directly. Other keys are used as the keyboard of your computer. Press [GREEN] button and then access the network main menu. If disagree, press [RED] button or [YELLOW] button to cancel or exit Disclaimer menu, then network cannot be used.
Advanced Features VUDU HD Movies subpage 1. Press the [Hi-Smart] button to display network main menu. 2. * <_ ` >\ !}} % and press [ENTER] to enter it. 3. * <_ ` >\ access, and press [ENTER] to enter it. 4. You can press [RETURN] to return the upper menu or press [EXIT] button to close the Widgets display.
Advanced Features Opera Operation instructions 1. Press the [Hi-Smart] button to display network main menu. The function of the buttons on the remote control 2. * <_ ` >\ press [ENTER] to enter it, or press [NETFLIX] button to enter Netflix website directly. Buttons Description 3. Input Email and Password in following window to sign in.
Advanced Features 4. Refresh page. Move the cursor to the icon and press [ENTER] button to refresh the current page. How to Add a Bookmark If you want to find the often viewed website from the favorite folder, you can follow the steps to add it to the folder. 5. Folder. Move the cursor to the icon and press [ENTER] button to enter the favorite folder. 1. Input the address on the address bar and enter it. 2. * < > _ `\ press [ENTER] button to confirm.
Advanced Features Add a folder How to select the Website from the favorite folder Close bookmark manager icon and press [ENTER] button 1. Move the cursor to the to confirm. The menu will pop up on the screen. Opera Software GOGI SDK Add a bookmark Are you sure to add it? Opera technology HISENSE 2. Move the cursor to the icon before the folder name and press [ENTER] button to confirm. The websites in the folder will appear in the following lines. Name: Add Cancel 3.
Advanced Features Other Apps Operation introduction 1. Press the [Hi-Smart] button to display network main menu. 2. * < > _ `\ press [ENTER] to enter it. Navy Bat... Tetris Penalty dress-up Penalty DICE GUESS NU # % DICE 2) * < > _ `\ install and press [ENTER] to confirm.
Advanced Features If installed, the applications will be shown in My Apps interface. SelfService: * <_ `\ [ENTER] to view the service information. Hotlist: 1) * <_ `\ ENTER] to enter it. <> Our Promise Thanks for you and your family choose Hisense Smart TV, we will continue to provide better and more services. Penalty 1.
Advanced Features Digital Media Play 4. Play the next video. You can press [ ] to achieve the function when no control bar display on the screen. Please note that Hisense will not assume any responsibility for any lost data and cannot guarantee perfect compatibility with all mass storage devices. Be sure to insert the USB disk or mobile hard disk with standard USB2.0 port. Press [INPUT] button to display the INPUT menu, press < >\ {* [ENTER] button to confirm.
Advanced Features 3. Press [ENTER] to browse the picture. 1. Press [RED] button to switch to All or Music. 4. Press [ /RETURN] to exit the picture and return to the previous directory. Tool bar Enjoy Music Files < / / / ] to select the music you want to view. 2. * DMP C:\ music I All I II ̰ Information 1 2 Return Video F1 F2 music F3 m.mp3 a2.mp3 Return Page up/down Type Filter 9 10 1. Browse the previous picture.
Advanced Features Browse the Text Files 2. * 1. Press [RED] button to switch to All or Book. < / / ] to select the text you want to view. DMP C:\TXT All Video Information Return 1.txt 2.txt TXT t.txt Music Picture Book Select Enter Return Type Filter Page up/down 3. Press [ENTER] button to confirm. 4. Press [ /RETURN] to exit the text and return to the previous directory. Tool bar II I 1 2 3 1.
Other Information Trouble Shooting When something appears wrong with your TV refer to below chart. If the proposed remedy’s do not work , then unplug the AC cord from wall, wait at least 60 seconds, plug AC back in and then turn on the TV. If the problem still cannot be solved, please contact the help line provided on the warranty card or a professional technician. SYMPTOMS POSSIBLE SOLUTIONS No sound or picture. Check if the power cord is plugged into AC outlet and if it has electricity.
Other Information SYMPTOMS POSSIBLE SOLUTIONS Confirm that TV still has power and is operational. Change the batteries in the remote control. Check if the batteries are correctly installed. Remote control does not work. If using a universal remote, be sure to select the TV mode on the remote. If the remote still does not work: -remove and reinstall the batteries correctly to reset the remote or install new batteries. -press TV and then Power to turn on the TV.
Other Information General NOTE Features, appearance and specifications are subject to change without notice. Model Name 32D77W 42D77W Without Stand Width: 31.2 inches (792 mm) Height: 19.8 inches (503 mm) Depth: 4 inches (101.5 mm) Width: 40.2 inches (1020 mm) Height: 25 inches (634 mm) Depth: 4.2 inches (106 mm) With Stand Width: 31.2 inches (792 mm) Height: 22.1 inches (561 mm) Depth: 9.1 inches (230 mm) Width: 40.2 inches (1020 mm) Height: 27.6 inches (700 mm) Depth: 11.
