ES-G131605 English
A
Important Safety Instructions The lightning flash with arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. 16.
Important Safety Instructions 22. When you connect the product to other equipment, turn off the power and unplug all of the equipment from the wall outlet. Failure to do so may cause an electric shock and serious personal injury. Read the owner's manual of the other equipment carefully and follow the instructions when making any connections. 23. Sudden high volume sound may cause hearing or speaker damage.
D
E
Important Safety Instructions When Installing the TV Against a Wall or Enclosed Area Make sure that your TV has adequate air circulation. Allow enough space around the TV as shown below. Avoid operating the TV at temperatures below 41°F (5°C). Install with stand Install on the wall 12 inches (30cm) 4 inches (10cm) 12 inches (30cm) 4 inches (10cm) 2 3⁄8 inches (6cm) 4 inches (10cm) 4 inches (10cm) Leave at least this much space around the set. Leave at least this much space around the set.
Legal Notices FCC Statement Energy Star NOTE: Yo u r H i s e n s e T V i s E N E R G Y STAR ® qualified in the “Energy Savings” mode. It meets strict energy efficiency guidelines set by the U.S. Environmental Protection Agency and Department of Energy. ENERGY STAR is a joint program of these government agencies, designed to promote energy efficient products and practices. Changes to certain features, settings, and functionalities of this TV (i.e.
Contents Getting Started Installing Batteries in the Remote Control ....................................................... 3 Making Connections ........................................................................................ 4 Network Connection ........................................................................................ 7 Basic Features Turning your TV on or off ................................................................................. 9 Turning the TV On for the First Time ..
Contents Advanced Features VUDU Apps .................................................................................................... 22 Netflix.............................................................................................................. 23 Vimeo ............................................................................................................. 23 Pandora .......................................................................................................... 24 Twitter ....
Getting Started Installing Batteries in the Remote Control Change the batteries 1. Press the release button on the back of the remote control to remove the battery compartment cover. 2. Insert two AAA size batteries. Make sure to match the (+) and ( - ) ends of the batteries with the (+) and ( - ) ends indicated in the battery compartment. 3. Replace the battery compartment cover. 1 Remove the battery compartment cover 2 Insert the batteries NOTES 1.
Getting Started Making connections NOTES Check the jacks for position and type before making any connections. Loose connections can result in image or color problems. Make sure that all connections are tight and secure. Not all A/V devices have the ability to connect to a TV, please refer to the user manual of your A/V device for compatibility and connections procedure. Always unplug the power cord when connecting external equipment. Connecting an antenna, cable or cable/satellite box 1.
Getting Started Connecting an A/V Device with Component (YPBPR) Cable 1. Use a component cable to connect the external A/V device’s component output jacks to the TV’s YPBPR jacks. Use an audio cable to connect the external A/V device’s component audio jacks to the TV’s AUDIO (L/R) jacks. 2. Plug the connected devices into the mains socket before switching on the TV. 3. Select the corresponding source from the TV.
Getting Started Connecting a PC with VGA Cable 1. Use a VGA cable to connect the PC’s VGA output jack to the TV’s VGA jack. Use an audio cable to connect the PC’s audio output jack to TV’s PC/DVI AUDIO IN jack. 2. Plug the connected devices into the mains socket before switching on the TV. 3. Select the corresponding source from the TV.
Getting Started Network Connection You can set up your TV so that it can access the Internet through your local area network (LAN) with a Ethernet or wireless connection. Connecting to a Wired Network You can attach your TV to your LAN by one of the three following ways: You can attach your TV to your LAN by connecting the LAN port on the back of your TV to an external modem using a Cat 5 LAN cable. See the diagram below.
Getting Started Connecting to a Wireless Network To connect your TV to your network wirelessly, you need a wireless router or modem. See the illustration below. Wireless IP Sharer(Router) The LAN Port on (with DHCP Server) the Wall Wireless LAN Adapter built-in TV set LAN Cable Hisense’s built-in Wireless LAN Adapter supports the IEEE 802.11 b/g/n communication protocols. Hisense recommends using IEEE 802.11n router. When you play the video over a IEEE 802.
Basic Features Turning your TV on or off To turn your TV on or off (standby mode): 1. Plug the power cord into an AC power outlet. 2. Press [POWER] button. Your TV turns on. 3. Press [POWER] button again to turn off your TV. When you turn off your TV, it goes into standby mode. WARNING When your TV is in standby mode, it is still receiving power. To completely disconnect power, unplug the power cord. 4. Select the country where you will operate the TV. 2.
7. Select Network : Connect your TV to access the network. 5.Select Network Depending on the reception condition, it may take up to 30 minutes or more to complete memorizing channels. Please allow the process to complete without interruption. After the Channel Search, a summary of the current settings will be displayed. Select “go” to exit the wizard. Next: Channel Search Select Network END USER TERMS AND CONDITIONS AND PRIVACY POLICY FOR HISMART SERVICES.
Shortcuts Instructions Sleep - It can set the TV to let it enter into the Standby state automatically. Press this button repeatedly to select the proper sleeping clock mode, and the clock tells you the remaining time before the TV enters Standby state. Aspect - Select the screen aspect ratio from Normal, Wide, Zoom, Cinema , 1:1 Pixel Map, and Auto. Normal: The original 4:3 aspect ratio (1.33:1 signal) is preserved, so black bars are added to the left and right of the image.
Basic Features To Use the Menu 1 Press the [MENU] button to open the main menu. 2 Press [▲/ ] to select a menu option, then press [ / Picture ▲ ▲ Picture Mode Brightness Contrast Color Tint Sharpness Advanced Video Reset Picture Settings ENTER] button to enter the menu. 3 In each menu, you can: ▲ ▲ ▲ Press [▲/ ] to select an item, Press [ / ] to adjust the value, or Press [ /ENTER] to enter the submenu, Press [MENU] to back the previous menu.
Basic Features Using the Audio Menu Audio Language - Change the default value for audio language. (Digital channels only) TV Speaker - Selects where to play TV audio. You can select On (default setting) to play audio through TV speakers, or select Off to play audio through the speakers on an external audio system. Audio Sound Mode Balance Equalizer Auto Volume Control Advanced Audio Reset Audio Settings Standard 0 > Off > > Personalize the audio to suit your preferences and listening conditions.
Basic Features Using the TV Menu Using the Setup Menu Settings Channels Tuner Mode Auto Channel Search Channel Skip Favorite List Signal Strength Audio Only Menu Settings Time Setup Parental Controls Caption CEC Function Demo Mode Power LED Version Info Reset Settings Antenna > > > 5 Personalize the local television services settings. Off > > > > > Personalize the general TV setting. Off On > > You can adjust: You can adjust: Tuner Mode - Select the TV signal source.
Basic Features Change Password - If you want to change the default password, first enter the new password then enter the same password again. G Reset Parental Control - You can reset all locks to factory mode. Reset to Factory Default - Restores the TV configuration to factory settings. You will need to complete the setup for such things as Tuner/Channel settings, Network connection, Date/Time and other user preferences.
Basic Features Using the Network Menu Device Auto Power Off: When HDMI-CEC is turned on, Device Auto Power Off turns off HDMI CEC devices when you turn off your TV. Network TV Auto Power On: When HDMI-CEC is turned on and you turn on an HDMI CEC device, TV Auto Power On turns on your TV automatically.
Basic Features DLNA: Digital Media Player (HiMedia) feature of Digital Living Network Alliance. Press the [◄/►] buttons to set DLNA to On. Network Setup (Manual) Use the Manual Network Setup when connecting your TV to a network that requires a Static IP address. Getting the Network Connection Values To get the network connection values on most windows computers, follow these steps: 1. Right click the Network icon in the bottom right of the screen. 2. In the pop-up menu that appears, click Status. 3.
Advanced Features DLNA Setting 8. If you select Auto, a screen will appear prompting you to select PIN (personal identification number) or PBC (push button configuration) setup. Choose the method supported by your wireless access point. If you choose PIN, an identification number will appear on the screen for you to enter into the access point. After entering the PIN, press the [►] button. If the PIN is in use by another device, select [REFRESH] to obtain a new PIN and enter it into the access point.
Advanced Features Setting to Share Files 1. Click “Library” and move the cursor to select “Media Sharing...” as shown in the following screen shot. 2. In the Media Sharing dialog box, select the Share my media check box and click “OK”. 3. After turnnig on media sharing, you need to select the devices that should have access to your Player library. An equipment icon will appear on the white area if the DLNA Settings have been correctly set.
Advanced Features Operational buttons Network Function NOTICE 1. 2. 3. 4. 5. 6. To access Internet streaming video services, please note the follow requirements. Use of Internet services requires a working broadband Internet connection (1 to 2 Mbps for SD video, 2.25 to 4.5 Mbps for HD video and 4.5 to 9 Mbps for 1080p and 3D video.).
Advanced Features Using the Home Menu Operation instructions 4 AccuWeather.com® 1 3 10/10 21℃ Sydney Mostly Cloudy 5 24MPH 2:28 PM Updated 2 1. Press the [HiSmart] button to display Home menu. Today Wednesday Thursday Friday Saturday Sunday 1/29/2013 1/30/2013 1/31/2013 2/1/2013 2/2/2013 2/3/2013 20/28℃ 20/27℃ 20/27℃ 20/29℃ 20/29℃ 20/26℃ Del this city 2. Press [◄/►/▲/▼] button to select the interface you Add a city ˚C/˚F City List Change Set default 1.
Advanced Features VUDU Movies 2. Press [ENTER] button to display the keyboard. There are some shortcuts on the bottom of the keyboard so that you can input part of the address often used directly. Other keys are used as the keyboard of your computer. Brief introduction VUDU is an on-demand service that offers high-definition movies via the web. To enjoy movies, please register and log in to your account.
Advanced Features Netflix Vimeo Netflix unlimited membership required. Brief introduction Vimeo App provides a variety of HD video. All these video are mainly divided into two parts: Featured Video and Categories Video which includes Activism & Non Profits, Animation &Motion Graphics, Art, Comedy, Education & DIY, Everyday Life, Experimental, Films, HD, Music, Products & Equipment, Science & Tech, Sports and others.
Advanced Features Picasa Pandora Brief introduction Brief introduction With Picasa you can explore featured photos in Google Picasa Web Album, also you can search your favorite photos in Google Picasa Web Album. If you have already had a Google Picasa account, you can enjoy your private photos stored in Google Picasa Web Album. Pandora is a personalized radio service that streams music on your TV.
Advanced Features Opera 10 Exit Browser. Move the cursor to the icon and press the [ENTER] button to close the page. Brief introduction The opera browser allows you to browse any URL, edit or delete folders, add bookmarks and select websites from the "Favorites" folder. The function of buttons on the remote control Key Operation Exit Exit Opera Browser. Operation instructions How to enter the Opera Browser Back to previous page or exit current page; Cancel pop dialoge or soft keyboard 1.
Advanced Features 3. Press the [▲/▼/◄/►] buttons to move the cursor to the characters you want to select and then press the [ENTER] button to confirm. If you want to delete one character, move the cursor to Back key and press the [ENTER] button to confirm. Or if you want to re-enter all the characters, move the cursor to Reset key and press the [ENTER] button to confirm. How to Add a Folder You can add a folder to the favorite as follows: 1.
Advanced Features Opera Apps Move the cursor to the Delete button and press the [ENTER] button to confirm. Then the folder/bookmark will be deleted from the favorite folder. Add a folder Brief introduction The user can browse and launch any application from the Opera App store dashboard. These applications are based on the Opera Devices SDK and are displayed in a layout optimized for widescreen television. In the Opera TV Store, there are more than 100 high-quality, HTML5-powered TV apps available.
Advanced Features Fast forward 1. Press the [▲/▼] buttons to select the "MENU" button on the top of the screen and press the [ENTER] button. A pop-up menu appears on the screen. The previous one The next one Fast backward Play/Pause 2. Press the [▼] button to select "REMOVE APP" option, select the application which you want to delete, then press the [ENTER] button. Stop NOTE When browsing the photos, only the buttons are available. SelfService 1.
Advanced Features 2. Press the [Yellow/Blue] buttons to turn to the previous/ next page. 3. Press the [▲/▼/◄/►] buttons to select the folder/file you want to open and then press the [ENTER] button to enter/ play the folder/file. 4. Press the [RETURN] button to return to the previous directory. 6 Stop browsing the picture. You can press the [■] button directly in the remote control when no control bar on the screen. 7 Zoom in the picture. 8 Zoom out the picture. 9 Option Set.
Advanced Features Enjoy Music Files 5 6 7 Fast backward. Then press the [ENTER] button to select the backward speed. You can press the [◄◄] button to achieve the function. 1. Press the [◄] button to switch to All or Music. 2. Press the [▲/▼/◄/►] buttons to select the music you want to view. Fast forward. Then press the [ENTER] button to select the forward speed. You can press the [►►] button to achieve the function. 3. Press the [ENTER] button to play the music. 4. All the music is listed on the left.
Other Information Troubleshooting If you experience difficulties while using the TV, please check the table below for possible solutions. SYMPTOMS POSSIBLE SOLUTIONS No sound or picture. Check if the power cord is in the AC outlet and if it has electricity. Check if you have pressed [POWER] button on the TV or [POWER] button on the remote control. I have connected an external source to my TV and I get no picture and/or sound.
Other Information SYMPTOMS POSSIBLE SOLUTIONS Not getting all of my cable channels on the television or I’m only getting 13 channels. Check the cable connection for an incoming signal. Make sure the signal is coming OK. Best way to confirm signal is to use another TV and/or contact your cable company. Reprogram your channels. Press [MENU] button on your TV remote control, change Input Source setting to “Cable”, then use “Auto Channels Search” to reprogram your channels.
